Products

Note: Call our Customer Service Department for availability of a specific style and size in aluminum, hard coat aluminum, brass, ductile iron, carbon steel, stainless steel, polypropylene, and nylon.

Part A: Male Cam x Female NPT

wdt_ID	Size	Part #
1	1/2"	50-A
2	3/4"	75-A
3	1"	100-A
4	1-1/4"	125-A
5	1-1/2"	150-A
6	2"	200-A
7	2-1/2"	250-A
8	3"	300-A
9	4"	400-A
10	5"	500-A
11	6"	600-A
12	8"	800-A
13	10"	1000-A

Part B: Female Cam x Male NPT

wdt_ID	Size	Part #
1	1/2"	50-C
2	3/4"	75-C
3	1"	100-C
4	1-1/4"	125-C
5	1-1/2"	150-C
6	2"	200-C
7	2-1/2"	250-C
8	3"	300-C
9	4"	400-C
10	5"	500-C
11	6"	600-C
12	8"	800-C
13	10"	1000-C

Part C: Female Cam x Hose Shank

wdt_ID	Size	Part #
1	1/2"	50-C
2	3/4"	75-C
3	1"	100-C
4	1-1/4"	125-C
5	1-1/2"	150-C
6	2"	200-C
7	2-1/2"	250-C
8	3"	300-C
9	4"	400-C
10	5"	500-C
11	6"	600-C
12	8"	800-C
13	10"	1000-C

Part D: Female Cam x Female NPT

wdt_ID	Size	Part #
1	1/2"	50-D
2	3/4"	75-D
3	1"	100-D
4	1-1/4"	125-D
5	1-1/2"	150-D
6	2"	200-D
7	2-1/2"	250-D
8	3"	300-D
9	4"	400-D
10	5"	500-D
11	6"	600-D
12	8"	800-D
13	10"	1000-D

Part E: Male Cam x Hose Shank

wdt_ID	Size	Part #
1	1/2"	50-E
2	3/4"	75-E
3	1"	100-E
4	1-1/4"	125-E
5	1-1/2"	150-E
6	2"	200-E
7	2-1/2"	250-E
8	3"	300-E
9	4"	400-E
10	5"	500-E
11	6"	600-E
12	8"	800-E
13	10"	1000-E

Part F: Male Cam x Male NPT

wdt_ID	Size	Part #
1	1/2"	50-F
2	3/4"	75-F
3	1"	100-F
4	1-1/4"	125-F
5	1-1/2"	150-F
6	2"	200-F
7	2-1/2"	250-F
8	3"	300-F
9	4"	400-F
10	5"	500-F
11	6"	600-F
12	8"	800-F
13	10"	1000-F

Part DC: Dust Cap

wdt_ID	Size	Part #
1	1/2"	50-DC
2	3/4"	75-DC
3	1"	100-DC
4	1-1/4"	125-DC
5	1-1/2"	150-DC
6	2"	200-DC
7	2-1/2"	250-DC
8	3"	300-DC
9	4"	400-DC
10	5"	500-DC
11	6"	600-DC
12	8"	800-DC
13	10"	1000-DC

Part DP: Dust Plug

wdt_ID	Size	Part #
1	1/2"	50-DP
2	3/4"	75-DP
3	1"	100-DP
4	1-1/4"	125-DP
5	1-1/2"	150-DP
6	2"	200-DP
7	2-1/2"	250-DP
8	3"	300-DP
9	4"	400-DP
10	5"	500-DP
11	6"	600-DP
12	8"	800-DP
13	10"	1000-DP

EZ Boss-Lock Fittings

No more fumbling with clamps, wire, clips or pins…Just close the handles and the locking mechanism is engaged!

Unlike other safety couplings:

The EZ Boss-Lock is extremely easy to open!!

The release lever is under your thumb when you want to open the fitting. ERGONOMIC.

The EZ Boss-Lock is resistant to accidental disconnection when being dragged.

The release lever opens in the direction opposite to the cam arm, so movements that tend to open the release lever also tend to close the cam arm!

The EZ Boss-Lock alerts you if it is not properly engaged.

If the rotating lever is not flush with the handle, it is not properly engaged.

The EZ Boss-Lock has no sliding pins to jam.

The EZ Boss-Lock’s rotating action helps keep the locking device free of debris.

The EZ Boss-Lock has no sliding pins to pop open.

The EZ Boss-Lock is designed to protect critical parts from impact and to withstand rugged use.

The EZ Boss-Lock can be supplied with special shanks custom suited to your needs

The EZ Boss-Lock is available with Swaged and PF shank designs, for hard to couple chemical hoses.

The EZ Boss-Lock is easier to insert into the hose tubes of Tank Trucks, and easier to use in restricted spaces.

This is due to the smaller maximum OD and a more snag free exterior.

The EZ Boss-Lock Cam Arm assemblies can be retrofitted onto undamaged stainless steel Boss-Lock

This allows you to protect your investment in stainless steel Boss-Lock couplings while you upgrade.

To Connect:

Open the coupler by pulling back on the locking lever above the cam arms while rotating the arms away from the body of the coupler.

Insert the adapter into the coupler.

Close the coupler by rotating the cam arms towards the body of the coupler. Locking occurs when the cam arms are closed. The coupler is properly closed when the locking levers on both cam arm assemblies are flush.

To Disconnect:

Open the coupler by pulling back on the locking lever above the cam arms while rotationg the arms away from the body of the coupler.

Remove the adapter from the coupler.

Close the coupler by rotating the cam arms towards the body of the coupler. By locking the coupler when not in use you will help to protect it from incidental damage.

Most important…the EZ Boss-Lock is made in the USA!

Reducing Cam and Groove Fittings

wdt_ID	Male Cam	Reducing Part A Female NPT	Part #
1	2"	1-1/2"	2015-A
2	2"	3"	2030-A
3	3"	2"	3020-A
4	3"	4"	3040-A
5	4"	3"	4030-A

wdt_ID	Female Cam	Reducing Part B Male NPT	Part #
1	1-1/2"	1"	1510-B
2	2"	1-1/2"	2015-B
3	2"	3"	2030-B
4	3"	2"	3020-B
5	3"	4"	3040-B

wdt_ID	Female Cam	Reducing Part C Hose Shank	Part #
1	2"	1-1/2"	2015-C
2	3"	2"	3020-C
3	3"	4"	3040-C
4	4"	3"	4030-C
5	6"	4"	6040-C

wdt_ID	Female Cam	Reducing Part D Female NPT	Part #
1	1-1/2"	1"	1510-D
2	2"	1-1/2"	2015-D
3	3"	2"	3020-D
4	4"	3"	4030-D
5	6"	4"	6040-D

wdt_ID	Male Cam	Reducing Part E Hose Shank	Part #
1	1-1/2"	1"	1510-E
2	2"	1-1/2"	2015-E
3	3"	2"	3020-E
4	4"	3"	4030-E
5	6"	4"	6040-E

wdt_ID	Male Cam	Reducing Part F Male NPT	Part #
1	1-1/2"	2"	1520-F
2	2"	3"	2030-F
3	3"	1-1/2"	3015-F
4	3"	2"	3020-F
5	3"	4"	3040-F

wdt_ID	Female Cam	Reducing Cam Male Cam	Part #
1	1"	1-1/2"	1015-DA
2	1-1/2"	1"	1510-DA
3	1-1/2"	2"	1520-DA
4	2"	1"	2010-DA
5	2"	1-1/2"	2015-DA

wdt_ID	Female Cam	Double Female Cam Female Cam	Part #
1	2"	2"	200-DD
2	2"	3"	2030-DD
3	3"	3"	300-DD
4	3"	4"	3040-DD
5	4"	4"	400-DD

wdt_ID	Male Cam	Double Male Cam Male Cam	Part #
1	1"	1"	100-AA
2	1-1/4"	1-1/4"	125-AA
3	1-1/2"	1-1/2"	150-AA
4	1-1/2"	2"	1520-AA
5	2"	2"	200-AA

150# ASA Flanged Cam Fittings

wdt_ID	Male Cam	Male Cam x 150# Flange 150# Flange	Part #
1	1"	1"	100-FLA
2	1-1/2"	1-1/2"	150-FLA
3	2"	2"	200-FLA
4	3"	3"	300-FLA
5	4"	4"	400-FLA
6	6"	6"	600-FLA

wdt_ID	Female Cam	Female Cam x 150# Flange 150# Flange	Part #
1	1"	1"	100-FLD
2	1-1/2"	1-1/2"	150-FLD
3	2"	2"	200-FLD
4	3"	3"	300-FLD
5	4"	4"	400-FLD
6	6"	6"	600-FLD

Note: As stated above, we distribute for several manufacturers of cam and groove fittings. Many other special cam fittings are available, such as:

Male or female cam fittings with API Tank Truck Flanges.
90 º cam fittings in many different configurations.
Cam fittings with Railroad Tank Car Connections (Straight and 45 º.)
Cam fittings meant for welding (Butt weld or socket weld to either tube or pipe.)
Cam dust caps with locking ears.
Cam hose fittings with special shanks for hoses with polyethylene (XLPE or UHMW) tubes.
Cam hose fittings specially made for swaging to hose.
Cam fittings specially designed for vapor recovery applications.
Cam fittings with Straight Pipe Thread for delivery of dry goods.

Cam and Groove Gaskets

Synthetic Rubber Gaskets

wdt_ID	Size	Buna-N	Extra Thick Buna-N	Viton ®	EPDM	Neoprene	White Buna-N	Silicone
1	1/2"	50-G-BU	50-G-THK	50-G-VI	50-G-EPR	50-G-NE	50-G-WB	50-G-SIL
2	3/4"	75-G-BU	75-G-THK	75-G-VI	75-G-EPR	75-G-NE	75-G-WB	75-G-SIL
3	1"	100-G-BU	100-G-THK	100-G-VI	100-G-EPR	100-G-NE	100-G-WB	100-G-SIL
4	1-1/4"	125-G-BU	125-G-THK	125-G-VI	125-G-EPR	125-G-NE	125-G-WB	125-G-SIL
5	1-1/2"	150-G-BU	150-G-THK	150-G-VI	150-G-EPR	150-G-NE	150-G-WB	150-G-SIL
6	2"	200-G-BU	200-G-THK	200-G-VI	200-G-EPR	200-G-NE	200-G-WB	200-G-SIL
7	2-1/2"	250-G-BU	250-G-THK	250-G-VI	250-G-EPR	250-G-NE	250-G-WB	250-G-SIL
8	3"	300-G-BU	300-G-THK	300-G-VI	300-G-EPR	300-G-NE	300-G-WB	300-G-SIL
9	4"	400-G-BU	400-G-THK	400-G-VI	400-G-EPR	400-G-NE	400-G-WB	400-G-SIL
10	5"	500-G-BU	500-G-THK	500-G-VI	500-G-EPR	500-G-NE	500-G-WB	500-G-SIL
11	6"	600-G-BU	600-G-THK	600-G-VI	600-G-EPR	600-G-NE	600-G-WB	600-G-SIL
12	8"	800-G-BU	800-G-THK	800-G-VI	800-G-EPR	800-G-NE	800-G-WB	800-G-SIL

Teflon ® Type Gaskets

Teflon ® envelope gaskets with Buna-N, White Buna-N, Viton ® or EPDM filler.
Teflon ® encapsulated gaskets with Silicone or Viton ® interior.
Teflon ® accordion gaskets.

Standard Handle Assemblies

wdt_ID	Description	Size	Brass P/N	Sintered S/S P/N	Investment S/S P/N
1	Handle and Pin	1/2"	50-HP-BR	50-HP-SP	-
2	Handle and Pin	3/4"	75-HP-BR	75-HP-SP	-
3	Handle and Pin	1"	100-HP-BR	100-HP-SP	-
4	Handle, Ring and Pin	1-1/4" to 2-1/2"	200-HRP-BR	200-HRP-SP	200-HRP-SI
5	Handle, Ring and Pin	3" to 5"	300-HRP-BR	300-HRP-SP	300-HRP-SI
6	Handle, Ring and Pin	6"	600-HRP-BR	-	600-HRP-SI
7	Handle and Pin	8"	800-HP-BR	-	-

Note: Please call our Customer Service Department for other Cam and Groove accessories, such as:

Special handles for locking dust caps and EZ Boss-Lock fittings.
Safety clips and lanyards for Boss-Lock fittings.
Jack chains and sash chains with S-hooks and pull rings.

Viton ® and Teflon ® are registered trademarks of DuPont Dow Elastomers

Note: Numbers with the asterisk (*) will have the dash sizes reversed.

Example: Brennan 2404-06-04 would equal an Aeroquip 2021-04-06.

Hydraulic Adapter Cross Reference

wdt_ID	Brennan	Aeroquip	Imperial	Parker Tube	Parker Hose	Stratoflex	Trident	United Tech	W-Head
1	302	-	-	-	-	1286	1326	-	-
2	304	221000	-	-	-	1287	1327	-	C5115
3	0304-C	210292	830FS	FNTX	06CP	1229	1329	820	C5129
4	306	210212	711BHFS	WLN	53N	1284	1332	894	C5624
5	0306N	210295	711FSO	-	-	1296	1330	-	-
6	318	1290	841FS	BTX	06B	1253	1311	818	C5105
7	319	900605	840FS	TX	06S	1244	1253	819	C5165
8	403	73014	-	-	-	2333	1403	-	-
9	404	73056	-	-	-	-	1404	-	-
10	405	FF1131	-	-	-	-	1405	-	-
11	500	FF1131	-	-	-	-	1500	-	-
12	600	FF1404	-	-	-	-	1600	-	-
13	1404	2045*	60SA	107	107	1210	-	42*	9205*
14	1405	2046*	60SG	207	207	1029	1212	23*	9255*
15	1406	-	-	-	-	-	1222	-	-
16	1501	2047*	60UA	2107	2107	1037	1218	44*	9405*
17	1502	-	60UG	2207	2207	1030	1216	45*	9455*
18	1503	2049*	60TA	3107	3107	1036	1214	35*	9355*
19	1504	2050*	60TG	-	-	15854	1249	37*	9385*
20	1601	2254*	60VC	-	-	15855	1258	46	9406*
21	1602	2253*	60VH	-	-	15856	1259	47	9456*
22	1603	2255	60VJ	-	-	15857	1223	48	-
23	1700	500025	63SB	-	-	-	6100	-	500
24	1703	500023	63TB	-	-	-	6145	-	545
25	1704	500024	63UB	-	-	-	9190	-	590
	Brennan	Aeroquip	Imperial	Parker Tube	Parker Hose	Stratoflex	Trident	United Tech	W-Head

At TFE – Transmission & Fluid Equipment we stock Brennan hydraulic adapters. The tables below show the styles and sizes we commonly stock. If you require a style or size not shown, please call our Customer Service Department for pricing and availability.

JIC Tube End Reducer 2406 Series

wdt_ID	Part #	JIC Thread B1	JIC Thread B2	Length L	Hex C
1	2406-04-06	7/16-20	9/16-18	1.007	5/8
2	2406-05-04	1/2-20	7/16-20	1.159	5/8
3	2406-05-08	1/2-20	3/4-16	1.266	13/16
4	2406-06-04	9/16-18	7/16-20	1.187	11/16
5	2406-06-05	1/2-20	1/2-20	1.181	11/16
6	2406-06-08	9/16-18	3/4-16	1.282	13/16
7	2406-08-04	3/4-16	7/16-20	1.328	7/8
8	2406-08-05	3/4-16	1/2-20	1.31	7/8
9	2406-08-06	3/4-16	9/16-18	1.328	7/8
10	2406-08-12	3/4-16	1 1/16-12	1.62	1 1/8
11	2406-10-04	7/8-14	7/16-20	1.468	1
12	2406-10-06	7/8-14	9/16-18	1.406	1
13	2406-10-08	7/8-14	3/4-16	1.406	1
14	2406-10-12	7/8-14	1 1/16-12	1.74	1 1/8
15	2406-12-04	1 1/16-12	7/16-20	1.499	1 1/4
16	2406-12-06	1 1/16-12	9/16-18	1.46	1 1/4
17	2406-12-08	1 1/16-12	3/4-16	1.563	1 1/4
18	2406-12-10	1 1/16-12	7/8-14	1.638	1 1/4
19	2406-14-12	1 3/16-12	1 1/16-12	1.796	1 3/8
20	2406-14-16	1 3/16-12	1 5/16-12	1.986	1 3/8
21	2406-16-08	1 5/16-12	3/4-16	1.719	1 1/2
22	2406-16-10	1 5/16-12	7/8-14	1.821	1 1/2
23	2406-16-12	1 5/16-12	1 1/16-12	1.823	1 1/2
24	2406-16-14	1 5/16-12	1 3/16-12	1.83	1 1/2
25	2406-16-20	1 5/16-12	1 5/8-12	2.3	1 11/16
26	2406-20-12	1 5/8-12	1 1/16-12	2	2
27	2406-20-16	1 5/8-12	1 5/16-12	2.005	2
28	2406-20-24	1 5/8-12	1 7/8-12	2.145	2
29	2406-24-16	1 7/8-12	1 5/16-12	2.503	2 1/4
30	2406-24-20	1 7/8-12	1 5/8-12	2.65	2 1/4
31	2406-24-32	1 7/8-12	2 1/2-12	2.395	2 5/8
32	2406-32-20	2 1/2-12	1 5/8-12	2.774	2 7/8
33	2406-32-24	2 1/2-12	1 7/8-12	2.614	2 7/8

JIC Swivel Elbow 90 º 6500 Series

wdt_ID	Part #	Tube Size	JIC Thread B1 & B2	Length M	Length L	Square Y
1	6500-04-04	1/4	7/16-20	0.892	1	1/2
2	6500-05-05	5/16	1/2-20	0.95	1.06	9/16
3	6500-06-06	3/8	9/16-18	1.06	1.25	5/8
4	6500-08-08	1/2	3/4-16	1.25	1.38	13/16
5	6500-10-10	5/8	7/8-14	1.45	1.62	15/16
6	6500-12-12	3/4	1 1/16-12	1.66	1.75	1 1/8
7	6500-14-14	7/8	1 3/16-12	1.73	1.78	1 1/4
8	6500-16-16	1	1 5/16-12	1.81	2	1 3/8
9	6500-20-20	1 1/4	1 5/8-12	2	2.31	1 3/4
10	6500-24-24	1 1/2	1 7/8-12	2.33	2.59	2
11	6500-32-32	2	2 1/2-12	3.06	3.38	2 5/8

JIC Swivel Elbow 45 º 6502 Series

wdt_ID	Part #	Tube Size	JIC Thread B1 & B2	Length L	Length M	Hex C
1	6502-04-04	1/4	7/16-20	0.72	0.94	1/2
2	6502-05-05	5/16	1/2-20	0.77	1	9/16
3	6502-06-06	3/8	9/16-18	0.83	1.12	5/8
4	6502-08-08	1/2	3/4-16	0.98	1.28	13/16
5	6502-10-10	5/8	7/8-14	1.11	1.44	15/16
6	6502-12-12	3/4	1 1/16-12	1.28	1.5	1 1/8
7	6502-14-14	7/8	1 3/16-12	1.39	1.62	1 1/4
8	6502-16-16	1	1 5/16-12	1.47	1.75	1 3/8
9	6502-20-20	1 1/4	1 5/8-12	1.59	2.03	1 3/4
10	6502-24-24	1 1/2	1 7/8-12	1.78	2.25	2
11	6502-32-32	2	2 1/2-12	2.22	2.91	2 5/8

JIC Swivel Tee Branch 6600 Series

wdt_ID	Part #	Tube Size	JIC Thread B1, B2 & B3	Length M	Length L	Square Y
1	6600-04-04	1/4	7/16-20	0.89	1	1/2
2	6600-05-05	5/16	1/2-20	0.95	1.06	9/16
3	6600-06-06	3/8	9/16-18	1.06	1.25	5/8
4	6600-08-08	1/2	3/4-16	1.25	1.38	13/16
5	6600-10-10	5/8	7/8-14	1.45	1.62	15/16
6	6600-12-12	3/4	1 1/16-12	1.66	1.75	1 1/8
7	6600-14-14	7/8	1 3/16-12	1.73	1.78	1 1/4
8	6600-16-16	1	1 5/16-12	1.81	2	1 3/8
9	6600-20-20	1 1/4	1 5/8-12	2.06	2.31	1 3/4
10	6600-24-24	1 1/2	1 7/8-12	2.33	2.59	2
11	6600-32-32	2	2 1/2-12	3.06	3.38	2 5/8

JIC Swivel Tee Run 6602 Series

wdt_ID	Part #	Tube Size	JIC Thread B1, B2 & B3	Length M	Length L	Square Y
1	6602-04-04	1/4	7/16-20	0.89	1	1/2
2	6602-05-05	5/16	1/2-20	0.95	1.06	9/16
3	6602-06-06	3/8	9/16-18	1.06	1.25	5/8
4	6602-08-08	1/2	3/4-16	1.25	1.38	13/16
5	6602-10-10	5/8	7/8-14	1.45	1.62	15/16
6	6602-12-12	3/4	1 1/16-12	1.66	1.75	1 1/8
7	6602-14-14	7/8	1 3/16-12	1.73	1.78	1 1/4
8	6602-16-16	1	1 5/16-12	1.81	2	1 3/8
9	6602-20-20	1 1/4	1 5/8-12	2.06	2.31	1 3/4
10	6602-24-24	1 1/2	1 7/8-12	2.33	2.59	2
11	6602-32-32	2	2 1/2-12	3.06	3.38	2 5/8

JIC Swivel Tee Male Branch 6603 Series

wdt_ID	Part #	Tube Size	JIC Thread B1, B2 & B3	Length N1	Length M5	Square Y
1	6603-08-08	1/2	3/4-16	1.25	1.38	13/16
2	6603-12-12	3/4	1 1/16-12	1.66	1.75	1 1/8

At TFE – Transmission & Fluid Equipment we stock Brennan hydraulic adapters. The tables above show the styles and sizes we commonly stock. If you require a style or size not shown, please call our Customer Service Department for pricing and availability.

JIC Straight Tube Union 2403 Series

wdt_ID	Part #	Tube OD	Thread B1	Thread B2	Length L	Hex C
1	2403-04-04	1/4	7/16-20	7/16-20	1.375	1/2
2	2403-05-04	5/16 1/4	1/2-20	7/16-20	1.375	9/16
3	2403-05-05	5/16	1/2-20	1/2-20	1.375	9/16
4	2403-06-04	3/8 1/4	3/4-16	7/16-20	1.406	5/8
5	2403-06-06	3/8	9/16-18	9/16-18	1.406	5/8
6	2403-08-04	1/2 1/4	3/4-16	7/16-20	1.51	13/16
7	2403-08-06	1/2 3/8	3/4-16	9/16-18	1.515	13/16
8	2403-08-08	1/2	3/4-16	3/4-16	1.625	13/16
9	2403-10-06	5/8 3/8	7/8-14	9/16-18	1.68	15/16
10	2403-10-08	5/8 1/2	7/8-14	3/4-16	1.781	15/16
11	2403-10-10	5/8	7/8-14	7/8-14	1.875	15/16
12	2403-12-08	3/4 1/2	1 1/16-12	3/4-16	1.953	1 1/8
13	2403-12-10	3/4 5/8	1 1/16-12	7/8-14	2.046	1 1/8
14	2403-12-12	3/4	1 1/16-12	1 1/16-12	2.156	1 1/8
15	2403-14-14	7/8	1 3/16-12	1 3/16-12	2.218	1 1/4
16	2403-16-12	1 3/4	1 5/16-12	1 1/16-12	2.21	1 3/8
17	2403-16-16	1	1 5/16-12	1 5/16-12	2.25	1 3/8
18	2403-20-16	1 1/4 1	1 5/8-12	1 5/16-12	2.38	1 11/16
19	2403-20-20	1 1/4	1 5/8-12	1 5/8-12	2.437	1 11/16
20	2403-24-20	1 1/2 1 1/4	1 7/8-12	1 5/8-12	2.62	2
21	2403-24-24	1 1/2	1 7/8-12	1 7/8-12	2.75	2
22	2403-32-32	2	2 1/2-12	2 1/2-12	3.406	2 5/8

JIC Tube Elbow-90 º 2500 Series

wdt_ID	Part #	Tube OD	Thread B1 & B2	Length M1 & M2	Square Y
1	2500-04-04	1/4	7/16-20	0.89	1/2
2	2500-05-05	5/16	1/2-20	0.953	9/16
3	2500-06-06	3/8	9/16-18	1.062	5/8
4	2500-08-08	1/2	3/4-16	1.25	13/16
5	2500-10-10	5/8	7/8-14	1.453	15/16
6	2500-12-12	3/4	1 1/16-12	1.656	1 1/8
7	2500-14-14	7/8	1 3/16-12	1.8	1 1/4
8	2500-16-16	1	1 5/16-12	1.812	1 3/8
9	2500-20-20	1 1/4	1 5/8-12	2.062	1 3/4
10	2500-24-24	1 1/2	1 7/8-12	2.328	2
11	2500-32-32	2	2 1/2-12	3.062	2 5/8

JIC Tube Elbow-45 º 2504 Series

wdt_ID	Part #	Tube OD	Thread B1 & B2	Length M1 & M2	Hex C
1	2504-04-04	1/4	7/16-20	0.81	1/2
2	2504-06-06	3/8	9/16-18	0.91	5/8
3	2504-08-08	1/2	3/4-16	1.13	13/16
4	2504-10-10	5/8	7/8-14	1.26	15/16
5	2504-12-12	3/4	1 1/16-12	1.28	1 1/8

JIC Tube Tee 2603 Series

wdt_ID	Part #	Tube OD	Thread B1, B2 & B3	Length M1 & M2	Square Y
1	2603-04-04-04	1/4	7/16-20	0.89	1/2
2	2603-05-05-05	5/16	1/2-20	0.953	9/16
3	2603-06-06-06	3/8	9/16-18	1.062	5/8
4	2603-08-08-08	1/2	3/4-16	1.25	13/16
5	2603-10-10-10	5/8	7/8-14	1.453	15/16
6	2603-12-12-12	3/4	1 1/16-12	1.656	1 1/8
7	2603-16-16-16	1	1 5/16-12	1.812	1 3/8
8	2603-20-20-20	1 1/14	1 5/8-12	2.062	1 3/4
9	2603-24-24-24	1 1/2	1 7/8-12	2.328	2
10	2603-32-32-32	2	2 1/2-12	3.062	2 5/8

JIC Tube Cross 2650 Series

wdt_ID	Part #	Tube OD	Thread B1, B2, B3 & B4	Length M	Square Y
1	2650-04-04-04-04	1/4	7/16-20	0.89	1/2
2	2650-05-05-05-05	5/16	1/2-20	0.953	9/16
3	2650-06-06-06-06	3/8	9/16-18	1.062	5/8
4	2650-08-08-08-08	1/2	3/4-16	1.25	13/16
5	2650-10-10-10-10	5/8	7/8-14	1.453	15/16
6	2650-12-12-12-12	3/4	1 1/16-12	1.656	1 1/8
7	2650-16-16-16-16	1	1 5/16-12	1.812	1 3/8
8	2650-20-20-20-20	1 1/14	1 5/8-12	2.062	1 3/4
9	2650-24-24-24-24	1 1/2	1 7/8-12	2.328	2
10	2650-32-32-32-32	2	2 1/2-12	3.062	2 5/8

JIC Bulkhead Tube Union 2700 Series

wdt_ID	Part #	Tube OD	Thread B1 & B2	Length L	Length L1	Hex C
1	2700-04-04	1/4	7/16-20	2.078	1.203	11/16
2	2700-05-05	5/16	1/2-20	2.078	1.203	3/4
3	2700-06-06	3/8	9/16-18	2.187	1.281	13/16
4	2700-08-08	1/2	3/4-16	2.437	1.437	1
5	2700-10-10	5/8	7/8-14	2.734	1.578	1 1/8
6	2700-12-12	3/4	1 1/16-12	3.093	1.75	1 3/8
7	2700-16-16	1	1 5/16-12	3.14	1.75	1 5/8
8	2700-20-20	1 1/14	1 5/8-12	3.312	1.796	1 7/8
9	2700-24-24	1 1/2	1 7/8-12	3.515	1.812	2 1/8
10	2700-32-32	2	2 1/2-12	4.203	2.093	2 3/4

JIC Bulkhead Tube Elbow-90 º 2701 Series

wdt_ID	Part #	Tube OD	Thread B1 & B2	Length M	Length L	Square Y
1	2701-04-04	1/4	7/16-20	0.968	1.56	1/2
2	2701-05-05	5/16	1/2-20	1.06	1.625	9/16
3	2701-06-06	3/8	9/16-18	1.093	1.812	5/8
4	2701-08-08	1/2	3/4-16	1.359	2.109	13/16
5	2701-10-10	5/8	7/8-14	1.562	2.39	15/16
6	2701-12-12	3/4	1 1/16-12	1.781	2.671	1 1/8
7	2701-16-16	1	1 5/16-12	1.937	2.796	1 3/8
8	2701-20-20	1 1/14	1 5/8-12	2.171	3.125	1 3/4
9	2701-24-24	1 1/2	1 7/8-12	2.343	3.421	2

JIC Bulkhead Tube Elbow-45 º 2702 Series

wdt_ID	Part #	Tube OD	Thread B1 & B2	Length M	Length L	Hex C
1	2702-04-04	1/4	7/16-20	0.718	1.53	1/2
2	2702-05-05	5/16	1/2-20	0.765	1.66	9/16
3	2702-06-06	3/8	9/16-18	0.828	1.671	5/8
4	2702-08-08	1/2	3/4-16	0.984	1.937	13/16
5	2702-10-10	5/8	7/8-14	1.109	2.171	15/16
6	2702-12-12	3/4	1 1/16-12	1.281	2.437	1 1/8
7	2702-16-16	1	1 5/16-12	1.468	2.562	1 3/8
8	2702-20-20	1 1/14	1 5/8-12	1.593	2.656	1 3/4
9	2702-24-24	1 1/2	1 7/8-12	1.781	2.671	2

JIC Bulkhead Branch Tee 2703 Series

wdt_ID	Part #	Tube OD	Thread B1, B2 & B3	Length M	Length L	Square Y
1	2703-04-04-04	1/4	7/16-20	0.968	1.593	1/2
2	2703-05-05-05	5/16	1/2-20	1.06	1.72	9/16
3	2703-06-06-06	3/8	9/16-18	1.093	1.812	5/8
4	2703-08-08-08	1/2	3/4-16	1.359	2.109	13/16
5	2703-10-10-10	5/8	7/8-14	1.562	2.39	15/16
6	2703-12-12-12	3/4	1 1/16-12	1.781	2.671	1 1/8
7	2703-16-16-16	1	1 5/16-12	1.937	2.796	1 3/8
8	2703-20-20-20	1 1/14	1 5/8-12	2.171	3.125	1 3/4

JIC Bulkhead Run Tee 2704 Series

wdt_ID	Part #	Tube OD	Thread B1, B2 & B3	Length M	Length L	Square Y
1	2703-04-04-04	1/4	7/16-20	0.968	1.593	1/2
2	2703-05-05-05	5/16	1/2-20	1.06	1.72	9/16
3	2703-06-06-06	3/8	9/16-18	1.093	1.812	5/8
4	2703-08-08-08	1/2	3/4-16	1.359	2.109	13/16
5	2703-10-10-10	5/8	7/8-14	1.562	2.39	15/16
6	2703-12-12-12	3/4	1 1/16-12	1.781	2.671	1 1/8
7	2703-16-16-16	1	1 5/16-12	1.937	2.796	1 3/8
8	2703-20-20-20	1 1/14	1 5/8-12	2.171	3.125	1 3/4

JIC x Pipe Straight Adapter Female 2405 Series

wdt_ID	Part #	Tube Size	Thread B1	Thread A2	Length L	Hex C
1	2405-04-02	1/4	7/16-20	1/8-27	1.187	9/16
2	2405-04-04	1/4	7/16-20	1/4-18	1.39	3/4
3	2405-05-02	5/16	1/2-20	1/8-27	1.171	9/16
4	2405-05-04	5/16	1/2-20	1/4-18	1.394	3/4
5	2405-06-02	3/8	9/16-18	1/8-27	1.18	5/8
6	2405-06-04	3/8	9/16-18	1/4-18	1.406	3/4
7	2405-06-06	3/8	9/16-18	3/8-18	1.459	7/8
8	2405-06-08	3/8	9/16-18	1/2-14	1.688	1 1/8
9	2405-08-04	1/2	3/4-16	1/4-18	1.51	13/16
10	2405-08-06	1/2	3/4-16	3/8-18	1.562	7/8
11	2405-08-08	1/2	3/4-16	1/2-14	1.789	1 1/8
12	2405-08-12	1/2	3/4-16	3/4-14	1.85	1 3/8
13	2405-10-06	5/8	7/8-14	3/8-18	1.89	7/8
14	2405-10-08	5/8	7/8-14	1/2-14	1.89	1 1/8
15	2405-10-12	5/8	7/8-14	3/4-14	1.954	1 3/8
16	2405-12-08	3/4	1 1/16-12	1/2-14	2.05	1 1/8
17	2405-12-12	3/4	1 1/16-12	3/4-14	2.062	1 3/8
18	2405-12-16	3/4	1 1/16-12	1-11 1/2	2.3	1 5/8
19	2405-14-12	7/8	1 3/16-12	3/4-14	2.062	1 3/8
20	2405-16-12	1	1 5/16-12	3/4-14	2.085	1 3/8
21	2405-16-16	1	1 5/16-12	1-11 1/2	2.343	1 5/8
22	2405-20-16	1 1/4	1 5/8-12	1-11 1/2	2.4	1 11/16
23	2405-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	2.484	2
24	2405-24-24	1 1/2	1 7/8-12	1 1/2-11 1/2	2.625	2 3/8
25	2405-32-32	2	2 1/2-12	2-11 1/2	2.968	2 7/8

JIC x Pipe 90 º Adapter Female 2502 Series

wdt_ID	Part #	Tube Size	Thread B1	Thread A2	Length M	Length L	Square Y
1	2502-04-02	1/4	7/16-20	1/8-27	1.078	0.656	5/8
2	2502-04-04	1/4	7/16-20	1/4-18	1.4	0.875	3/4
3	2502-05-02	5/16	1/2-20	1/8-27	1.078	0.656	5/8
4	2502-05-04	5/16	1/2-20	1/4-18	1.296	1.015	7/8
5	2502-06-02	3/8	9/16-18	1/8-27	1.234	0.875	3/4
6	2502-06-04	3/8	9/16-18	1/4-18	1.234	0.875	3/4
7	2502-06-06	3/8	9/16-18	3/8-18	1.11	0.875	3/4
8	2502-06-08	3/8	9/16-18	1/2-14	1.445	1.234	1 1/8
9	2502-08-04	1/2	3/4-16	1/4-18	1.421	1.015	7/8
10	2502-08-06	1/2	3/4-16	3/8-18	1.421	1.015	7/8
11	2502-08-08	1/2	3/4-16	1/2-14	1.52	1.234	1 1/8
12	2502-08-12	1/2	3/4-16	3/4-14	1.683	1.359	1 3/8
13	2502-10-06	5/8	7/8-14	3/8-18	1.64	1.234	1 1/8
14	2502-10-08	5/8	7/8-14	1/2-14	1.64	1.234	1 1/8
15	2502-10-12	5/8	7/8-14	3/4-14	1.783	1.359	1 3/8
16	2502-12-08	3/4	1 1/16-12	1/2-14	1.89	1.359	1 3/8
17	2502-12-12	3/4	1 1/16-12	3/4-14	1.89	1.359	1 3/8
18	2502-12-16	3/4	1 1/16-12	1-11 1/2	1.701	1.625	1 5/8
19	2502-14-12	7/8	1 3/16-12	3/4-14	1.859	1.421	1 3/8
20	2502-16-12	1	1 5/16-12	3/4-14	2.171	1.625	1 5/8
21	2502-16-16	1	1 5/16-12	1-11 1/2	2.171	1.625	1 5/8
22	2502-16-20	1	1 5/16-12	1 1/4-11 1/2	2.281	1.703	2
23	2502-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	2.328	1.703	2
24	2502-24-24	1 1/2	1 7/8-12	1 1/2-11 1/2	2.89	2.078	2 3/8
25	2502-32-32	2	2 1/2-12	2-11 1/2	3.296	2.39	2 7/8

JIC x Pipe 45 º Adapter Female 2505 Series

wdt_ID	Part #	Tube Size	Thread B1	Thread A2	Length N	Length M	Hex C
1	2505-06-04	3/8	9/16-18	1/4-18	1.12	0.74	3/4
2	2505-08-06	1/2	3/4-16	3/8-18	1.2	0.94	7/8
3	2505-08-08	1/2	3/4-16	1/2-14	1.22	0.96	1 1/8
4	2505-10-08	5/8	7/8-14	1/2-14	1.41	0.96	1 1/8
5	2505-12-12	3/4	1 1/16-12	3/4-14	1.53	1.03	1 3/16
6	2505-16-16	1	1 5/16-12	1-11 1/2	1.7	1.11	1 5/8

JIC x Pipe Branch Tee Female 2602 Series

wdt_ID	Part #	Tube Size	Thread B1 & B2	Thread A3	Length M	Length N	Square Y
1	2602-04-04-02	1/4	7/16-20	1/8-27	1.078	0.654	5/8
2	2602-04-04-04	1/4	7/16-20	1/4-18	1.14	0.875	3/4
3	2602-05-05-02	5/16	1/2-20	1/8-27	1.078	0.656	5/8
4	2602-06-06-04	3/8	9/16-18	1/4-18	1.234	0.875	3/4
5	2602-06-06-06	3/8	9/16-18	3/8-18	1.32	1.015	7/8
6	2602-08-08-04	1/2	3/4-16	1/4-18	1.36	0.9	13/16
7	2602-08-08-06	1/2	3/4-16	3/8-18	1.421	1.015	7/8
8	2602-08-08-08	1/2	3/4-16	1/2-14	1.57	1.234	1 1/8
9	2602-10-10-04	5/8	7/8-14	1/4-18	1.45	0.9	15/16
10	2602-10-10-08	5/8	7/8-14	1/2-14	1.64	1.234	1 1/8
11	2602-10-10-12	5/8	7/8-14	3/4-14	1.76	1.36	1 3/8
12	2602-12-12-08	3/4	1 1/16-12	1/2-14	1.66	1.24	1 1/8
13	2602-12-12-12	3/4	1 1/16-12	3/4-14	1.89	1.359	1 3/8
14	2602-14-14-12	7/8	1 3/16-12	3/4-14	1.859	1.421	1 3/8
15	2602-16-16-12	1	1 5/16-12	3/4-14	2.05	1.36	1 3/8
16	2602-16-16-16	1	1 5/16-12	1-11 1/2	2.171	1.625	1 5/8
17	2602-20-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	2.328	1.703	2
18	2602-24-24-24	1 1/2	1 7/8-12	1 1/2-11 1/2	2.89	2.078	2 3/8
19	2602-32-32-32	2	2 1/2-12	2-11 1/2	3.296	2.39	2 7/8

JIC x Pipe Bulkhead Adapter Female 2705 Series

wdt_ID	Part #	Tube Size	Thread A1	Thread B2	Length L	Length L1	Hex C
1	2705-02-04	1/4	1/8-27	7/16-20	2.08	1.203	11/16
2	2705-04-06	3/8	1/4-18	9/16-18	2.124	1.281	11/16
3	2705-06-08	1/2	3/8-18	3/4-16	2.48	1.437	7/8
4	2705-08-08	1/2	1/2-14	3/4-16	2.53	1.44	1 1/8
5	2705-08-10	5/8	1/2-14	7/8-14	2.84	1.578	1
6	2705-12-12	3/4	3/4-14	1 1/16-12	3.05	1.75	1 3/8
7	2705-12-14	7/8	3/4-14	1 3/16-12	2.89	1.76	1 1/2
8	2705-16-16	1	1-11 1/2	1 5/16-12	3.25	1.75	1 1/2
9	2705-20-20	1 1/4	1 1/4-11 1/2	1 5/8-12	3.218	1.8	2

JIC x Pipe Straight Adapter Male 2404 Series

wdt_ID	Part #	Tube Size	Thread B1	Thread A2	Length L	Hex C
1	2404-04-02	1/4	7/16-20	1/8-27	1.218	1/2
2	2404-04-04	1/4	7/16-20	1/4-18	1.421	5/8
3	2404-04-06	1/4	7/16-20	3/8-18	1.421	5/8
4	2404-05-02	5/16	1/2-20	1/8-27	1.218	9/16
5	2404-05-04	5/16	1/2-20	1/4-18	1.421	5/8
6	2404-06-02	3/8	9/16-18	1/8-27	1.25	5/8
7	2404-06-04	3/8	9/16-18	1/4-18	1.437	5/8
8	2404-06-06	3/8	9/16-18	3/8-18	1.421	13/16
9	2404-06-08	3/8	9/16-18	1/2-14	1.687	15/16
10	2404-08-04	1/2	3/4-16	1/4-18	1.531	13/16
11	2404-08-06	1/2	3/4-16	3/8-18	1.531	13/16
12	2404-08-08	1/2	3/4-16	1/2-14	1.781	15/16
13	2404-08-12	1/2	3/4-16	3/4-14	1.859	1 1/8
14	2404-10-06	5/8	7/8-14	3/8-18	1.7	15/16
15	2404-10-08	5/8	7/8-14	1/2-14	1.89	15/16
16	2404-10-12	5/8	7/8-14	3/4-14	1.95	1 1/8
17	2404-12-08	3/4	1 1/16-12	1/2-14	1.765	1 1/8
18	2404-12-12	3/4	1 1/16-12	3/4-14	2.062	1 3/8
19	2404-12-16	3/4	1 1/16-12	1-11 1/2	2.25	1 11/16
20	2404-14-12	7/8	1 3/16-12	3/4-14	2.093	1 1/4
21	2404-16-12	1	1 5/16-12	3/4-14	2.11	1 3/8
22	2404-16-16	1	1 5/16-12	1-11 1/2	2.296	1 3/8
23	2404-16-20	1	1 5/16-12	1 1/4-11 1/2	2.406	1 11/16
24	2404-20-16	1 1/4	1 5/8-12	1-11 1/2	2.421	1 11/16
25	2404-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	2.453	1 11/16
26	2404-20-24	1 1/4	1 5/8-12	1 1/2-11 1/2	2.555	2
27	2404-24-20	1 1/2	1 7/8-12	1 1/4-11 1/2	2.64	2
28	2404-24-24	1 1/2	1 7/8-12	1 1/2-11 1/2	2.687	2
29	2404-24-32	1 1/2	1 7/8-12	2-11 1/2	2.86	2 1/2
30	2404-32-24	2	2 1/2-12	1 1/2-11 1/2	3.08	2 5/8
31	2404-32-32	2	2 1/2-12	2-11 1/2	3.109	2 5/8
32	2404-40-40	2 1/2	3-12	2 1/2-8	3.375	3 1/4

JIC x Pipe Straight Adapter Male Long 2404-L Series

wdt_ID	Part #	Tube Size	Thread B1	Thread A2	Length L	Hex C
1	2404-L-04-02	1/4	7/16-20	1/8-27	1.812	1/2
2	2404-L-04-04	1/4	7/16-20	1/4-18	2.253	5/8
3	2404-L-05-02	5/16	1/2-20	1/8-27	1.937	9/16
4	2404-L-06-04	3/8	9/16-18	1/4-18	2.25	5/8
5	2404-L-06-06	3/8	9/16-18	3/8-18	2.501	3/4
6	2404-L-08-06	1/2	3/4-16	3/8-18	2.75	13/16
7	2404-L-08-08	1/2	3/4-16	1/2-14	3.041	7/8
8	2404-L-10-08	5/8	7/8-14	1/2-14	3.125	15/16
9	2404-L-12-12	3/4	1 1/16-12	3/4-14	3.5	1 1/8
10	2404-L-16-16	1	1 5/16-12	1-11 1/2	4	1 3/8
11	2404-L-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	4.5	1 11/16

JIC x Pipe Straight Adapter Male Extra Long 2404-LL Series

wdt_ID	Part #	Tube Size	Thread B1	Thread A2	Length L	Hex C
1	2404-LL-04-02	1/4	7/16-20	1/8-27	2.562	1/2
2	2404-LL-04-04	1/4	7/16-20	1/4-18	3.251	5/8
3	2404-LL-05-02	5/16	1/2-20	1/8-27	2.812	9/16
4	2404-LL-06-04	3/8	9/16-18	1/4-18	3.25	5/8
5	2404-LL-06-06	3/8	9/16-18	3/8-18	3.922	3/4
6	2404-LL-08-06	1/2	3/4-16	3/8-18	4	13/16
7	2404-LL-08-08	1/2	3/4-16	1/2-14	4.199	7/8
8	2404-LL-10-08	5/8	7/8-14	1/2-14	4.375	15/16
9	2404-LL-12-12	3/4	1 1/16-12	3/4-14	5	1 1/8
10	2404-LL-16-16	1	1 5/16-12	1-11 1/2	5.75	1 3/8

JIC x Pipe 90 º Adapter Male 2501 Series

wdt_ID	Part #	Tube Size	Thread B1	Thread A2	Length M	Length L	Square Y
1	2501-04-02	1/4	7/16-20	1/8-27	0.89	0.781	1/2
2	2501-04-04	1/4	7/16-20	1/4-18	1.05	1.093	5/8
3	2501-04-06	1/4	7/16-20	3/8-18	0.98	1.218	13/16
4	2501-05-02	5/16	1/2-20	1/8-27	0.953	0.781	9/16
5	2501-05-04	5/16	1/2-20	1/4-18	1.05	1.093	5/8
6	2501-06-02	3/8	9/16-18	1/8-27	1.062	0.9	5/8
7	2501-06-04	3/8	9/16-18	1/4-18	1.062	1.093	5/8
8	2501-06-06	3/8	9/16-18	3/8-18	1.14	1.218	13/16
9	2501-06-08	3/8	9/16-18	1/2-14	1.13	1.468	15/16
10	2501-08-04	1/2	3/4-16	1/4-18	1.25	1.22	13/16
11	2501-08-06	1/2	3/4-16	3/8-18	1.25	1.218	13/16
12	2501-08-08	1/2	3/4-16	1/2-14	1.33	1.468	15/16
13	2501-08-12	1/2	3/4-16	3/4-14	1.406	1.593	1 1/8
14	2501-10-06	5/8	7/8-14	3/8-18	1.453	1.281	15/16
15	2501-10-08	5/8	7/8-14	1/2-14	1.453	1.468	15/16
16	2501-10-12	5/8	7/8-14	3/4-14	1.546	1.593	1 1/8
17	2501-12-08	3/4	1 1/16-12	1/2-14	1.656	1.59	1 1/8
18	2501-12-12	3/4	1 1/16-12	3/4-14	1.656	1.593	1 1/8
19	2501-12-16	3/4	1 1/16-12	1-11 1/2	1.76	1.968	1 3/8
20	2501-14-12	7/8	1 3/16-12	3/4-14	1.8	1.687	1 1/4
21	2501-16-12	1	1 5/16-12	3/4-14	1.812	1.78	1 3/8
22	2501-16-16	1	1 5/16-12	1-11 1/2	1.812	1.968	1 3/8
23	2501-16-20	1	1 5/16-12	1 1/4-11 1/2	2.09	2.375	1 3/4
24	2501-20-16	1 1/4	1 5/8-12	1-11 1/2	2.062	2.156	1 3/4
25	2501-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	2.062	2.375	1 3/4
26	2501-20-24	1 1/4	1 5/8-12	1 1/2-11 1/2	2.3	2.64	2
27	2501-24-20	1 1/2	1 7/8-12	1 1/4-11 1/2	2.328	2.5	2
28	2501-24-24	1 1/2	1 7/8-12	1 1/2-11 1/2	2.328	2.64	2
29	2501-32-24	2	2 1/2-12	1 1/2-11 1/2	3.08	2.64	2 5/8
30	2501-32-32	2	2 1/2-12	2-11 1/2	3.062	3	2 5/8

JIC x Pipe 90 º Adapter Male Long 2501-L Series

wdt_ID	Part #	Tube Size	Thread B1	Thread A2	Length M	Length L	Square Y
1	2501-L-04-02	1/4	7/16-20	1/8-27	0.89	1.171	1/2
2	2501-L-04-04	1/4	7/16-20	1/4-18	0.97	1.59	5/8
3	2501-L-05-02	5/16	1/2-20	1/8-27	0.953	1.17	9/16
4	2501-L-06-04	3/8	9/16-18	1/4-18	1.062	1.578	5/8
5	2501-L-06-06	3/8	9/16-18	3/8-18	1.156	1.828	13/16
6	2501-L-08-06	1/2	3/4-16	3/8-18	1.25	1.828	13/16
7	2501-L-08-08	1/2	3/4-16	1/2-14	1.25	2.23	15/16
8	2501-L-10-08	5/8	7/8-14	1/2-14	1.453	2.171	15/16
9	2501-L-12-12	3/4	1 1/16-12	3/4-14	1.656	2.437	1 1/8
10	2501-L-16-16	1	1 5/16-12	1-11 1/2	1.812	3.015	1 3/8
11	2501-L-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	2.062	3.687	1 3/4
12	2501-L-24-24	1 1/2	1 7/8-12	1 1/2-11 1/2	2.323	4.109	2

JIC x Pipe 90 º Adapter Male Extra Long 2501-LL Series

wdt_ID	Part #	Tube Size	Thread B1	Thread A2	Length M	Length L	Square Y
1	2501-LL-04-02	1/4	7/16-20	1/8-27	0.89	1.562	1/2
2	2501-LL-04-04	1/4	7/16-20	1/4-18	0.97	1.99	5/8
3	2501-LL-05-02	5/16	1/2-20	1/8-27	0.953	1.625	9/16
4	2501-LL-06-04	3/8	9/16-18	1/4-18	1.062	2.078	5/8
5	2501-LL-06-06	3/8	9/16-18	3/8-18	1.16	2.5	13/16
6	2501-LL-08-06	1/2	3/4-16	3/8-18	1.25	2.421	13/16
7	2501-LL-08-08	1/2	3/4-16	1/2-14	1.25	3.01	15/16
8	2501-LL-10-08	5/8	7/8-14	1/2-14	1.453	2.875	15/16
9	2501-LL-12-12	3/4	1 1/16-12	3/4-14	1.656	3.281	1 1/8
10	2501-LL-16-16	1	1 5/16-12	1-11 1/2	1.812	4.046	1 3/8
11	2501-LL-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	2.062	4.88	1 3/4
12	2501-LL-24-24	1 1/2	1 7/8-12	1 1/2-11 1/2	2.323	5.75	2

JIC x Pipe 45 º Adapter Male 2503 Series

wdt_ID	Part #	Tube Size	Thread B1	Thread A2	Length M	Length L	Hex C
1	2503-04-02	1/4	7/16-20	1/8-27	0.718	0.64	1/2
2	2503-04-04	1/4	7/16-20	1/4-18	0.812	0.859	5/8
3	2503-05-02	5/16	1/2-20	1/8-27	0.765	0.64	9/16
4	2503-05-04	5/16	1/2-20	1/4-18	0.828	0.859	5/8
5	2503-06-02	3/8	9/16-18	1/8-27	0.812	0.656	5/8
6	2503-06-04	3/8	9/16-18	1/4-18	0.823	0.859	13/16
7	2503-06-06	3/8	9/16-18	3/8-18	0.906	0.953	15/16
8	2503-08-04	1/2	3/4-16	1/4-18	0.984	0.937	13/16
9	2503-08-06	1/2	3/4-16	3/8-18	0.984	0.953	13/16
10	2503-08-08	1/2	3/4-16	1/2-14	1.125	1.171	15/16
11	2503-08-12	1/2	3/4-16	3/4-14	1.187	1.203	1 1/8
12	2503-10-06	5/8	7/8-14	3/8-18	1.109	1.062	15/16
13	2503-10-08	5/8	7/8-14	1/2-14	1.109	1.171	15/16
14	2503-10-12	5/8	7/8-14	3/4-14	1.265	1.203	1 1/8
15	2503-12-08	3/4	1 1/16-12	1/2-14	1.281	1.187	1 1/8
16	2503-12-12	3/4	1 1/16-12	3/4-14	1.281	1.203	1 1/8
17	2503-12-16	3/4	1 1/16-12	1-11 1/2	1.421	1.484	1 3/8
18	2503-14-12	7/8	1 3/16-12	3/4-14	1.45	1.3	1 1/4
19	2503-16-12	1	1 5/16-12	3/4-14	1.468	1.281	1 3/8
20	2503-16-16	1	1 5/16-12	1-11 1/2	1.468	1.484	1 3/8
21	2503-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	1.593	1.671	1 3/4
22	2503-24-24	1 1/2	1 7/8-12	1 1/2-11 1/2	1.781	1.765	2
23	2503-32-32	2	2 1/2-12	2-11 1/2	2.218	2.109	2 5/8

JIC x Pipe Male Branch Tee 2601 Series

wdt_ID	Part #	Tube Size	Thread B1 & B3	Thread A2	Length M	Length L	Square Y
1	2601-04-04-02	1/4	7/16-20	1/8-27	0.89	0.781	1/2
2	2601-04-04-04	1/4	7/16-20	1/4-18	0.953	1.105	5/8
3	2601-05-05-02	5/16	1/2-20	1/8-27	0.953	0.781	9/16
4	2601-06-06-04	3/8	9/16-18	1/4-18	1.062	1.093	5/8
5	2601-06-06-06	3/8	9/16-18	3/8-18	1.156	1.218	13/16
6	2601-08-08-06	1/2	3/4-16	3/8-18	1.25	1.218	13/16
7	2601-08-08-08	1/2	3/4-16	1/2-14	1.36	1.468	15/16
8	2601-10-10-08	5/8	7/8-14	1/2-14	1.453	1.468	15/16
9	2601-12-12-12	3/4	1 1/16-12	3/4-14	1.656	1.593	1 1/8
10	2601-16-16-16	1	1 5/16-12	1-11 1/2	1.812	1.968	1 3/8
11	2601-20-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	2.062	2.375	1 3/4
12	2601-24-24-24	1 1/2	1 7/8-12	1 1/2-11 1/2	2.328	2.64	2

JIC x Pipe Male Run Tee 2605 Series

wdt_ID	Part #	Tube Size	Thread B1 & B2	Thread A3	Length M	Length L	Square Y
1	2605-04-02-04	1/4	7/16-20	1/8-27	0.89	0.781	1/2
2	2605-04-04-04	1/4	7/16-20	1/4-18	0.953	1.093	5/8
3	2605-05-02-05	5/16	1/2-20	1/8-27	0.953	0.781	9/16
4	2605-06-04-06	3/8	9/16-18	1/4-18	1.062	1.093	5/8
5	2605-06-06-06	3/8	9/16-18	3/8-18	1.156	1.24	13/16
6	2605-08-06-08	1/2	3/4-16	3/8-18	1.25	1.218	13/16
7	2605-08-08-08	1/2	3/4-16	1/2-14	1.312	1.468	15/16
8	2605-10-08-10	5/8	7/8-14	1/2-14	1.453	1.468	15/16
9	2605-12-12-12	3/4	1 1/16-12	3/4-14	1.656	1.593	1 1/8
10	2605-16-16-16	1	1 5/16-12	1-11 1/2	1.812	1.968	1 3/8
11	2605-20-20-20	1 1/4	1 5/8-12	1 1/4-11 1/2	2.062	2.375	1 3/4
12	2605-24-24-24	1 1/2	1 7/8-12	1 1/2-11 1/2	2.328	2.64	2

JIC x Pipe Male Bulkhead 2706 Series

wdt_ID	Part #	Tube Size	Thread B1	Thread B2	Length L	Length L1	Hex C
1	2706-02-04	1/4	1/8-27	7/16-20	1.84	1.203	11/16
2	2706-04-04	1/4	1/4-18	7/16-20	2.04	1.281	11/16
3	2706-04-06	3/8	1/4-18	9/16-18	2.19	1.281	13/16
4	2706-06-08	1/2	3/8-18	3/4-16	2.35	1.437	1
5	2706-08-10	5/8	1/2-14	7/8-14	2.72	1.578	1 1/8
6	2706-12-12	3/4	3/4-14	1 1/16-12	2.92	1.75	1 3/8
7	2706-16-16	1	1-11 1/2	1 5/16-12	3.1	1.75	1 5/8
8	2706-20-20	1 1/4	1 1/4-11 1/2	1 5/8-12	3.23	1.8	1 7/8

JIC x O-Ring Boss Straight Male Adapter 6400 Series

wdt_ID	Part #	Tube Size	Thread B1	Thread B2	Length L	Hex C
1	6400-04-04-O	1/4	7/16-20	7/16-20	1.23	9/16
2	6400-04-05-O	1/4	7/16-20	1/2-20	1.23	5/8
3	6400-04-06-O	1/4	7/16-20	9/16-18	1.3	11/16
4	6400-05-04-O	5/16	1/2-20	7/16-20	1.24	9/16
5	6400-05-05-O	5/16	1/2-20	1/2-20	1.21	5/8
6	6400-05-06-O	5/16	1/2-20	9/16-18	1.36	11/16
7	6400-06-04-O	3/8	9/16-18	7/16-20	1.33	5/8
8	6400-06-05-O	3/8	9/16-18	1/2-20	1.29	5/8
9	6400-06-06-O	3/8	9/16-18	9/16-18	1.3	11/16
10	6400-06-08-O	3/8	9/16-18	3/4-16	1.375	7/8
11	6400-08-06-O	1/2	3/4-16	9/16-18	1.45	13/16
12	6400-08-08-O	1/2	3/4-16	3/4-16	1.49	7/8
13	6400-08-10-O	1/2	3/4-16	7/8-14	1.59	1
14	6400-08-12-O	1/2	3/4-16	1 1/16-12	1.77	1 1/4
15	6400-10-08-O	5/8	7/8-14	3/4-16	1.67	15/16
16	6400-10-10-O	5/8	7/8-14	7/8-14	1.7	1
17	6400-10-12-O	5/8	7/8-14	1 1/16-12	1.86	1 1/4
18	6400-12-08-O	3/4	1 1/16-12	3/4-16	1.84	1 1/8
19	6400-12-10-O	3/4	1 1/16-12	7/8-14	1.91	1 1/8
20	6400-12-12-O	3/4	1 1/16-12	1 1/16-12	1.97	1 1/4
21	6400-12-16-O	3/4	1 1/16-12	1 5/16-12	1.98	1 1/2
22	6400-14-12-O	7/8	1 3/16-12	1 1/16-12	1.98	1 1/4
23	6400-14-14-O	7/8	1 3/16-12	1 3/16-12	1.98	1 3/8
24	6400-16-12-O	1	1 5/16-12	1 1/16-12	2.05	1 3/8
25	6400-16-16-O	1	1 5/16-12	1 5/16-12	2.05	1 1/2
26	6400-16-20-O	1	1 5/16-12	1 5/8-12	2.13	1 7/8
27	6400-20-16-O	1 1/4	1 5/8-12	1 5/16-12	2.2	1 11/16
28	6400-20-20-O	1 1/4	1 5/8-12	1 5/8-12	2.17	1 7/8
29	6400-20-24-O	1 1/4	1 5/8-12	1 7/8-12	2.25	2 1/8
30	6400-24-20-O	1 1/2	1 7/8-12	1 5/8-12	2.34	2
31	6400-24-24-O	1 1/2	1 7/8-12	1 7/8-12	2.38	2 1/8
32	6400-32-32-O	2	2 1/2-12	2 1/2-12	2.78	2 3/4

JIC x O-Ring Boss Straight Male Long Adapter 6400-L Series

wdt_ID	Part #	Tube Size	Thread B1	Thread B2	Length L6	Hex C
1	6400-L-04-04-O	1/4	7/16-20	7/16-20	2.07	9/16
2	6400-L-05-05-O	5/16	1/2-20	1/2-20	2.15	5/8
3	6400-L-06-06-O	3/8	9/16-18	9/16-18	2.3	11/16
4	6400-L-06-08-O	3/8	9/16-18	3/4-16	2.38	7/8
5	6400-L-08-08-O	1/2	3/4-16	3/4-16	2.7	7/8
6	6400-L-08-10-O	1/2	3/4-16	7/8-14	2.81	1
7	6400-L-10-10-O	5/8	7/8-14	7/8-14	3.04	1
8	6400-L-12-12-O	3/4	1 1/16-12	1 1/16-12	3.59	1 1/4
9	6400-L-12-16-O	3/4	1 1/16-12	1 5/16-12	3.61	1 1/2
10	6400-L-14-14-O	7/8	1 3/16-12	1 3/16-12	3.8	1 3/8
11	6400-L-16-16-O	1	1 5/16-12	1 5/16-12	3.98	1 1/2
12	6400-L-20-20-O	1 1/4	1 5/8-12	1 5/8-12	4.69	1 7/8

JIC x O-Ring Boss 90 º Male Adapter 6801 Series

wdt_ID	Part #	Tube Size	Thread B1	Thread B2	Length M	Length L	Square Y
1	6801-04-04-NWO	1/4	7/16-20	7/16-20	0.89	1.03	1/2
2	6801-04-05-NWO	1/4	7/16-20	1/2-20	0.95	1.13	5/8
3	6801-04-06-NWO	1/4	7/16-20	9/16-18	0.95	1.25	5/8
4	6801-05-04-NWO	5/16	1/2-20	7/16-20	0.98	1.06	9/16
5	6801-05-05-NWO	5/16	1/2-20	1/2-20	0.95	1.09	9/16
6	6801-05-06-NWO	5/16	1/2-20	9/16-18	0.98	1.25	5/8
7	6801-06-04-NWO	3/8	9/16-18	7/16-20	1.06	1.09	5/8
8	6801-06-05-NWO	3/8	9/16-18	1/2-20	1.06	1.13	5/8
9	6801-06-06-NWO	3/8	9/16-18	9/16-18	1.06	1.25	5/8
10	6801-06-08-NWO	3/8	9/16-18	3/4-16	1.16	1.45	13/16
11	6801-08-06-NWO	1/2	3/4-16	9/16-18	1.25	1.34	13/16
12	6801-08-08-NWO	1/2	3/4-16	3/4-16	1.25	1.45	13/16
13	6801-08-10-NWO	1/2	3/4-16	7/8-14	1.31	1.7	15/16
14	6801-08-12-NWO	1/2	3/4-16	1 1/16-12	1.41	1.94	1 1/8
15	6801-10-08-NWO	5/8	7/8-14	3/4-16	1.45	1.52	15/16
16	6801-10-10-NWO	5/8	7/8-14	7/8-14	1.45	1.7	15/16
17	6801-10-12-NWO	5/8	7/8-14	1 1/16-12	1.55	1.94	1 1/8
18	6801-12-08-NWO	3/4	1 1/16-12	3/4-16	1.66	1.61	1 1/8
19	6801-12-10-NWO	3/4	1 1/16-12	7/8-14	1.66	1.8	1 1/8
20	6801-12-12-NWO	3/4	1 1/16-12	1 1/16-12	1.66	1.94	1 1/8
21	6801-12-16-NWO	3/4	1 1/16-12	1 5/16-12	1.78	2.05	1 3/8
22	6801-14-12-NWO	7/8	1 3/16-12	1 1/16-12	1.74	1.99	1 1/4
23	6801-14-14-NWO	7/8	1 3/16-12	1 3/16-12	1.72	2	1 1/4
24	6801-16-12-NWO	1	1 5/16-12	1 1/16-12	1.81	2.06	1 3/8
25	6801-16-16-NWO	1	1 5/16-12	1 5/16-12	1.81	2.05	1 3/8
26	6801-16-20-NWO	1	1 5/16-12	1 5/8-12	2	2.25	1 3/4
27	6801-20-16-NWO	1 1/4	1 5/8-12	1 5/16-12	2.06	2.23	1 3/4
28	6801-20-20-NWO	1 1/4	1 5/8-12	1 5/8-12	2.06	2.25	1 3/4
29	6801-20-24-NWO	1 1/4	1 5/8-12	1 7/8-12	2.28	2.42	1 7/8
30	6801-24-20-NWO	1 1/2	1 7/8-12	1 5/8-12	2.33	2.38	2
31	6801-24-24-NWO	1 1/2	1 7/8-12	1 7/8-12	2.33	2.39	2
32	6801-32-32-NWO	2	2 1/2-12	2 1/2-12	3.06	2.89	2 5/8

JIC x O-Ring Boss 90 º Male Adapter 6801 Series

JIC x O-Ring Boss 90 º Male Long Adapter 6801-L Series

wdt_ID	Part #	Tube Size	Thread B1	Thread B2	Length M	Length L	Square Y
1	6801-L-04-04-NWO	1/4	7/16-20	7/16-20	0.89	1.19	1/2
2	6801-L-06-06-NWO	3/8	9/16-18	9/16-18	1.06	1.66	5/8
3	6801-L-06-08-NWO	3/8	9/16-18	3/4-16	1.15	1.81	13/16
4	6801-L-08-08-NWO	1/2	3/4-16	3/4-16	1.25	1.81	13/16
5	6801-L-08-10-NWO	1/2	3/4-16	7/8-14	1.33	1.71	15/16
6	6801-L-10-10-NWO	5/8	7/8-14	7/8-14	1.445	2.16	15/16
7	6801-L-10-12-NWO	5/8	7/8-14	1 1/16-12	1.66	2.25	1 1/8
8	6801-L-12-10-NWO	3/4	1 1/16-12	7/8-14	1.52	2.47	1 1/8
9	6801-L-12-12-NWO	3/4	1 1/16-12	1 1/16-12	1.66	2.47	1 1/8
10	6801-L-16-12-NWO	3/4	1 5/16-12	1 1/16-12	1.81	2.59	1 3/8
11	6801-L-16-16-NWO	1	1 5/16-12	1 5/16-12	1.81	3.06	1 3/8

JIC x O-Ring Boss 90 º Male Extra Long Adapter 6801-LL Series

wdt_ID	Part #	Tube Size	Thread B1	Thread B2	Length M	Length L	Square Y
1	6801-LL-04-04-NWO	1/4	7/16-20	7/16-20	0.89	1.83	1/2
2	6801-LL-06-06-NWO	3/8	9/16-18	9/16-18	1.06	2.08	5/8
3	6801-LL-06-08-NWO	3/8	9/16-18	3/4-16	1.15	2.49	13/16
4	6801-LL-08-06-NWO	1/2	3/4-16	9/16-18	1.25	2.18	13/16
5	6801-LL-08-08-NWO	1/2	3/4-16	3/4-16	1.25	2.49	13/16
6	6801-LL-08-10-NWO	5/8	3/4-16	7/8-14	1.3	3.23	15/16
7	6801-LL-10-10-NWO	5/8	7/8-14	7/8-14	1.45	3.23	15/16
8	6801-LL-12-12-NWO	3/4	1 1/16-12	1 1/16-12	1.66	3.34	1 1/8
9	6801-LL-12-16-NWO	3/4	1 1/16-12	1 5/16-12	1.78	3.72	1 3/8
10	6801-LL-14-14-NWO	7/8	1 3/16-12	1 3/16-12	1.73	3.57	1 1/4
11	6801-LL-16-16-NWO	1	1 5/16-12	1 5/16-12	1.81	3.71	1 3/8

JIC x O-Ring Boss 45 º Male Adapter 6802 Series

wdt_ID	Part #	Tube Size	Thread B1	Thread B2	Length M	Length M1	Hex C
1	6802-04-04-NWO	1/4	7/16-20	7/16-20	0.72	1.05	1/2
2	6802-04-05-NWO	1/4	7/16-20	1/2-20	0.73	1.12	9/16
3	6802-04-06-NWO	1/4	7/16-20	9/16-18	0.79	1.1	5/8
4	6802-05-04-NWO	5/16	1/2-20	7/16-20	0.79	1	9/16
5	6802-05-05-NWO	5/16	1/2-20	1/2-20	0.77	1.05	9/16
6	6802-05-06-NWO	5/16	1/2-20	9/16-18	0.85	1.11	5/8
7	6802-06-04-NWO	3/8	9/16-18	7/16-20	0.91	1	5/8
8	6802-06-05-NWO	3/8	9/16-18	1/2-20	0.91	1	5/8
9	6802-06-06-NWO	3/8	9/16-18	9/16-18	0.83	1.14	5/8
10	6802-06-08-NWO	3/8	9/16-18	3/4-16	0.88	1.3	13/16
11	6802-08-06-NWO	1/2	3/4-16	9/16-18	0.98	1.17	13/16
12	6802-08-08-NWO	1/2	3/4-16	3/4-16	0.98	1.3	13/16
13	6802-08-10-NWO	1/2	3/4-16	7/8-14	0.99	1.52	15/16
14	6802-10-08-NWO	5/8	7/8-14	3/4-16	1.09	1.41	15/16
15	6802-10-10-NWO	5/8	7/8-14	7/8-14	1.11	1.52	15/16
16	6802-10-12-NWO	5/8	7/8-14	1 1/16-12	1.27	1.75	1 1/8
17	6802-12-10-NWO	3/4	1 1/16-12	7/8-14	1.3	1.58	1 1/8
18	6802-12-12-NWO	3/4	1 1/16-12	1 1/16-12	1.28	1.73	1 1/8
19	6802-12-16-NWO	3/4	1 1/16-12	1 5/16-12	1.45	1.86	1 3/8
20	6802-14-14-NWO	7/8	1 3/16-12	1 3/16-12	1.39	1.8	1 1/4
21	6802-16-12-NWO	1	1 5/16-12	1 1/16-12	1.47	1.86	1 3/8
22	6802-16-16-NWO	1	1 5/16-12	1 5/16-12	1.47	1.86	1 3/8
23	6802-16-20-NWO	1	1 5/16-12	1 5/8-12	1.55	1.95	1 3/4
24	6802-20-16-NWO	1 1/4	1 5/8-12	1 5/16-12	1.65	2.07	1 3/4
25	6802-20-20-NWO	1 1/4	1 5/8-12	1 5/8-12	1.59	1.91	1 3/4
26	6802-24-24-NWO	1 1/2	1 7/8-12	1 7/8-12	1.78	1.91	2
27	6802-32-32-NWO	2	2 1/2-12	2 1/2-12	2.22	1.86	2 5/8

JIC x O-Ring Boss Male Branch Tee 6803 Series

wdt_ID	Part #	Tube Size	Thread B1 & B2	Thread B3	Length M	Length L	Square Y
1	6803-04-04-04-NWO	1/4	7/16-20	7/16-20	0.89	1.03	1/2
2	6803-04-04-06-NWO	1/4	7/16-20	9/16-18	0.95	1.26	5/8
3	6803-05-05-05-NWO	5/16	1/2-20	1/2-20	0.95	1.09	9/16
4	6803-06-06-06-NWO	3/8	9/16-18	9/16-18	1.06	1.25	5/8
5	6803-06-06-08-NWO	3/8	9/16-18	3/4-16	1.15	1.45	13/16
6	6803-06-06-12-NWO	3/8	9/16-18	1 1/16-12	1.3	1.94	1 1/8
7	6803-08-08-06-NWO	1/2	3/4-16	9/16-18	1.25	1.33	15/16
8	6803-08-08-08-NWO	1/2	3/4-16	3/4-16	1.25	1.45	13/16
9	6803-08-08-10-NWO	1/2	3/4-16	7/8-14	1.32	1.71	15/16
10	6803-08-08-12-NWO	1/2	3/4-16	1 1/16-12	1.42	1.94	1 1/8
11	6803-10-10-08-NWO	5/8	7/8-14	3/4-16	1.46	1.51	15/16
12	6803-10-10-10-NWO	5/8	7/8-14	7/8-14	1.45	1.7	15/16
13	6803-10-10-12-NWO	5/8	7/8-14	1 1/16-12	1.55	1.94	1 1/8
14	6803-10-10-16-NWO	5/8	7/8-14	1 5/16-12	1.67	2.04	1 3/8
15	6803-12-12-08-NWO	3/4	1 1/16-12	3/4-16	1.65	1.61	1 1/8
16	6803-12-12-10-NWO	3/4	1 1/16-12	7/8-14	1.66	1.81	1 1/8
17	6803-12-12-12-NWO	3/4	1 1/16-12	1 1/16-12	1.66	1.94	1 1/8
18	6803-12-12-16-NWO	3/4	1 1/16-12	1 5/16-12	1.79	2.05	1 3/8
19	6803-14-14-14-NWO	7/8	1 3/16-12	1 3/16-12	1.73	2	1 1/4
20	6803-16-16-12-NWO	1	1 5/16-12	1 1/16-12	1.81	2.05	1 3/8
21	6803-16-16-16-NWO	1	1 5/16-12	1 5/16-12	1.81	2.05	1 3/8
22	6803-20-20-20-NWO	1 1/4	1 5/8-12	1 5/8-12	2.06	2.25	1 3/4
23	6803-24-24-24-NWO	1 1/2	1 7/8-12	1 7/8-12	2.33	2.39	2

JIC Cap Nut 304-C Series

wdt_ID	Part #	Tube OD	Thread B1	Length L	Hex C
1	304-C-04	1/4	7/16-20	0.594	9/16
2	304-C-05	5/16	1/2-20	0.609	5/8
3	304-C-06	3/8	9/16-16	0.625	11/16
4	304-C-08	1/2	3/4-16	0.75	7/8
5	304-C-10	5/8	7/8-14	0.844	1
6	304-C-12	3/4	1 1/16-12	0.906	1 1/4
7	304-C-14	7/8	1 3/16-12	0.969	1 3/8
8	304-C-16	1	1 5/16-12	1.016	1 1/2
9	304-C-20	1 1/4	1 5/8-12	1.062	2
10	304-C-24	1 1/2	1 7/8-12	1.188	2 1/4
11	304-C-32	2	2 1/2-12	1.438	2 7/8

JIC Bulkhead Nut 306 Series

wdt_ID	Part #	Tube OD	Thread B1	Width W	Hex C
1	306-04	1/4	7/16-20	0.25	11/16
2	306-05	5/16	1/2-20	0.25	3/4
3	306-06	3/8	9/16-16	0.281	13/16
4	306-08	1/2	3/4-16	0.343	1
5	306-10	5/8	7/8-14	0.391	1 1/8
6	306-12	3/4	1 1/16-12	0.438	1 3/8
7	306-14	7/8	1 3/16-12	0.406	1 1/2
8	306-16	1	1 5/16-12	0.406	1 5/8
9	306-20	1 1/4	1 5/8-12	0.406	1 7/8
10	306-24	1 1/2	1 7/8-12	0.421	2 1/8
11	306-32	2	2 1/2-12	0.406	2 3/4

JIC Nut 318 Series

wdt_ID	Part #	Tube OD	Thread B1	Length L	Hex C
1	318-04	1/4	7/16-20	0.61	9/16
2	318-05	5/16	1/2-20	0.67	5/8
3	318-06	3/8	9/16-16	0.72	11/16
4	318-08	1/2	3/4-16	0.84	7/8
5	318-10	5/8	7/8-14	0.97	1
6	318-12	3/4	1 1/16-12	1.02	1 1/4
7	318-14	7/8	1 3/16-12	1.08	1 3/8
8	318-16	1	1 5/16-12	1.12	1 1/2
9	318-20	1 1/4	1 5/8-12	1.22	2
10	318-24	1 1/2	1 7/8-12	1.41	2 1/4
11	318-32	2	2 1/2-12	1.74	2 7/8

JIC Sleeve 319 Series

wdt_ID	Part #	Tube OD	Length L
1	319-04	1/4	0.41
2	319-05	5/16	0.44
3	319-06	3/8	0.5
4	319-08	1/2	0.56
5	319-10	5/8	0.66
6	319-12	3/4	0.68
7	319-14	7/8	0.76
8	319-16	1	0.78
9	319-20	1 1/4	0.91
10	319-24	1 1/2	1.12
11	319-32	2	1.19

JIC Plug 2408 Series

wdt_ID	Part #	Tube OD	Thread B1	Length L	Hex C
1	2408-04	1/4	7/16-20	0.796	1/2
2	2408-05	5/16	1/2-20	0.796	9/16
3	2408-06	3/8	9/16-18	0.843	5/8
4	2408-08	1/2	3/4-16	0.937	13/16
5	2408-10	5/8	7/8-14	1.093	15/16
6	2408-12	3/4	1 1/16-12	1.281	1 1/8
7	2408-14	7/8	1 3/16-12	1.312	1 1/4
8	2408-16	1	1 5/16-12	1.328	1 3/8
9	2408-20	1 1/4	1 5/8-12	1.453	1 11/16
10	2408-24	1 1/2	1 7/8-12	1.656	2
11	2408-32	2	2 1/2-12	2.005	2 5/8

Female O-Ring x Male Pipe 6404 Series

wdt_ID	Part #	Thread B1	Thread A2	Length L	Hex C
1	6404-04-02	7/16-20	1/8-27	1.13	11/16
2	6404-04-04	7/16-20	1/4-18	1.32	11/16
3	6404-04-06	7/16-20	3/8-18	1.13	11/16
4	6404-05-02	1/2-20	1/8-27	1.37	3/4
5	6404-05-04	1/2-20	1/4-18	1.39	3/4
6	6404-06-04	9/16-18	1/4-18	1.39	7/8
7	6404-06-06	9/16-18	3/8-18	1.39	7/8
8	6404-06-08	9/16-18	1/2-14	1.42	7/8
9	6404-08-06	3/4-16	3/8-18	1.5	1
10	6404-08-08	3/4-16	1/2-14	1.7	1
11	6404-08-12	3/4-16	3/4-14	1.69	1 1/8
12	6404-10-06	7/8-14	3/8-18	1.62	1 1/4
13	6404-10-08	7/8-14	1/2-14	1.82	1 1/4
14	6404-10-12	7/8-14	3/4-14	1.72	1 1/8
15	6404-12-08	1 1/16-12	1/2-14	1.96	1 3/8
16	6404-12-12	1 1/16-12	3/4-14	1.96	1 3/8
17	6404-14-12	1 3/16-12	3/4-14	2.04	1 1/2
18	6404-16-12	1 5/16-12	3/4-14	2.06	1 5/8
19	6404-16-16	1 5/16-12	1-11 1/2	2.22	1 5/8
20	6404-16-20	1 5/16-12	1 1/4-11 1/2	1.9	2
21	6404-20-16	1 5/8-12	1-11 1/2	2.21	2
22	6404-20-20	1 5/8-12	1 1/4-11 1/2	2.34	2 1/8
23	6404-24-24	1 7/8-12	1 1/2-11 1/2	2.3	2 1/4
24	6404-32-32	2 1/2-12	2-11 1/2	2.66	2 7/8

Male O-Ring x Female Pipe 6405 Series

wdt_ID	Part #	Thread B1	Thread A2	Length L	Hex C
1	6405-04-02-O	7/16-20	1/8-27	0.968	9/16
2	6405-04-04-O	7/16-20	1/4-18	1.156	3/4
3	6405-04-06-O	7/16-20	3/8-18	1.21	7/8
4	6405-05-02-O	1/2-20	1/8-27	0.937	5/8
5	6405-05-04-O	1/2-20	1/4-18	1.16	3/4
6	6405-06-02-O	9/16-18	1/8-27	0.73	11/16
7	6405-06-04-O	9/16-18	1/4-18	1.15	3/4
8	6405-06-06-O	9/16-18	3/8-18	1.16	7/8
9	6405-06-08-O	9/16-18	1/2-14	1.4	1 1/8
10	6405-08-06-O	3/4-16	3/8-18	1.28	7/8
11	6405-08-08-O	3/4-16	1/2-14	1.44	1 1/8
12	6405-08-12-O	3/4-16	3/4-14	1.54	1 3/8
13	6405-10-06-O	7/8-14	3/8-18	1.55	1 1/8
14	6405-10-08-O	7/8-14	1/2-14	1.546	1 1/8
15	6405-10-12-O	7/8-14	3/4-14	1.66	1 3/8
16	6405-12-08-O	1 1/16-12	1/2-14	1.5	1 1/4
17	6405-12-12-O	1 1/16-12	3/4-14	1.59	1 3/8
18	6405-12-16-O	1 1/16-12	1-11 1/2	1.91	1 5/8
19	6405-14-12-O	1 3/16-12	3/4-14	1.593	1 3/8
20	6405-16-12-O	1 5/16-12	3/4-14	1.51	1 1/2
21	6405-16-16-O	1 5/16-12	1-11 1/2	1.843	1 5/8
22	6405-16-20-O	1 5/16-12	1 1/4-11 1/2	2.27	2
23	6405-20-16-O	1 5/8-12	1-11 1/2	1	1 7/8
24	6405-20-20-O	1 5/8-12	1 1/4-11 1/2	1.875	2
25	6405-20-24-O	1 5/8-12	1 1/2-11 1/2	2.28	2 3/8
26	6405-24-20-O	1 7/8-12	1 1/4-11 1/2	2.12	2 1/8
27	6405-24-24-O	1 7/8-12	1 1/2-11 1/2	2.14	2 3/8
28	6405-32-32-O	2 1/2-12	2-11 1/2	2.01	2 7/8

Male O-Ring Boss Plug 6408 Series

wdt_ID	Part #	Thread B1	Length L	Hex C
1	6408-02-O	5/16-24	0.6	7/16
2	6408-03-O	3/8-24	0.6	1/2
3	6408-04-O	7/16-20	0.67	9/16
4	6408-05-O	1/2-20	0.67	5/8
5	6408-06-O	9/16-18	0.73	11/16
6	6408-08-O	3/4-16	0.8	7/8
7	6408-10-O	7/8-14	0.94	1
8	6408-12-O	1 1/16-12	1.09	1 1/4
9	6408-14-O	1 3/16-12	1.09	1 3/8
10	6408-16-O	1 5/16-12	1.13	1 1/2
11	6408-20-O	1 5/8-12	1.2	1 7/8
12	6408-24-O	1 7/8-12	1.27	2 1/8
13	6408-32-O	2 1/2-12	1.44	2 3/4

Male O-Ring x Female O-Ring 6410 Series

wdt_ID	Part #	Thread B1	Thread B2	Length L	Hex C
1	6410-04-05-O	7/16-20	1/2-20	1.08	3/4
2	6410-04-06-O	7/16-20	9/16-18	1.16	13/16
3	6410-05-04-O	1/2-20	7/16-20	1.22	5/8
4	6410-06-04-O	9/16-18	7/16-20	1.03	11/16
5	6410-06-08-O	9/16-18	3/4-16	1.39	1 1/16
6	6410-08-04-O	3/4-16	7/16-20	0.81	7/8
7	6410-08-06-O	3/4-16	9/16-18	1.16	7/8
8	6410-08-10-O	3/4-16	7/8-14	1.48	1 1/8
9	6410-08-12-O	3/4-16	1 1/16-12	1.65	1 3/8
10	6410-10-06-O	7/8-14	9/16-18	0.94	1
11	6410-10-08-O	7/8-14	3/4-16	1.31	1
12	6410-10-12-O	7/8-14	1 1/16-12	1.66	1 3/8
13	6410-12-04-O	1 1/16-12	7/16-20	1.09	1 1/4
14	6410-12-06-O	1 1/16-12	9/16-18	1.09	1 1/4
15	6410-12-08-O	1 1/16-12	3/4-16	1.09	1 1/4
16	6410-12-10-O	1 1/16-12	7/8-14	1.56	1 1/4
17	6410-12-16-O	1 1/16-12	1 5/16-12	1.81	1 1/2
18	6410-12-20-O	1 1/16-12	1 5/8-12	2	2
19	6410-14-12-O	1 3/16-12	1 1/16-12	1.71	1 3/8
20	6410-14-16-O	1 3/16-12	1 5/16-12	1.75	1 1/2
21	6410-16-08-O	1 5/16-12	3/4-16	1.73	1 1/2
22	6410-16-10-O	1 5/16-12	7/8-14	1.13	1 1/2
23	6410-16-12-O	1 5/16-12	1 1/16-12	1.71	1 1/2
24	6410-16-14-O	1 5/16-12	1 3/16-12	1.71	1 1/2
25	6410-16-20-O	1 5/16-12	1 5/8-12	2.14	2 1/8
26	6410-20-12-O	1 5/8-12	1 1/16-12	1	1 7/8
27	6410-20-16-O	1 5/8-12	1 5/16-12	1.19	1 7/8
28	6410-20-24-O	1 5/8-12	1 7/8-12	1.89	2 1/4
29	6410-24-12-O	1 7/8-12	1 1/16-12	1	2 1/8
30	6410-24-16-O	1 7/8-12	1 5/16-12	1	2 1/8
31	6410-24-20-O	1 7/8-12	1 5/8-12	1.58	2 1/8
32	6410-32-24-O	2 1/2-12	1 7/8-12	1.44	2 3/4

Male O-Ring x Female Pipe-90 º 6805 Series

wdt_ID	Part #	Thread B1	Thread A2	Length N	Length L	Square Y
1	6805-04-02-NWO	7/16-20	1/8-27	0.66	1.09	5/8
2	6805-04-04-NWO	7/16-20	1/4-18	0.87	1.16	3/4
3	6805-05-02-NWO	1/2-20	1/8-27	0.66	1.13	5/8
4	6805-06-04-NWO	9/16-18	1/4-18	0.88	1.31	3/4
5	6805-06-06-NWO	9/16-18	3/8-18	1.01	1.36	7/8
6	6805-08-06-NWO	3/4-16	3/8-18	1.02	1.48	7/8
7	6805-08-08-NWO	3/4-16	1/2-14	1.24	1.59	1 1/8
8	6805-10-06-NWO	7/8-14	3/8-18	1.02	1.66	7/8
9	6805-10-08-NWO	7/8-14	1/2-14	1.23	1.8	1 1/8
10	6805-12-08-NWO	1 1/16-12	1/2-14	1.24	1.94	1 1/8
11	6805-12-12-NWO	1 1/16-12	3/4-14	1.36	2.06	1 3/8
12	6805-14-12-NWO	1 3/16-12	3/4-14	1.42	2.06	1 3/8
13	6805-16-12-NWO	1 5/16-12	3/4-14	1.37	2.03	1 3/8
14	6805-16-16-NWO	1 5/16-12	1-11 1/2	1.63	2.17	1 5/8
15	6805-20-20-NWO	1 5/8-12	1 1/4-11 1/2	1.7	2.38	2
16	6805-24-24-NWO	1 7/8-12	1 1/2-11 1/2	2.08	2.58	2 3/8
17	6805-32-32-NWO	2 1/2-12	2-11 1/2	2.39	3.02	2 7/8

Male O-Ring x Swivel Female Pipe 6900 Series

wdt_ID	Part #	Thread B1	Thread A2	Length L	Hex C
1	6900-04-02-O	7/16-20	1/8-27	1.06	9/16
2	6900-04-04-O	7/16-20	1/4-18	1.109	9/16
3	6900-04-06-O	7/16-20	3/8-18	1.15	11/16
4	6900-05-04-O	1/2-20	1/4-18	1.092	5/8
5	6900-06-04-O	9/16-18	1/4-18	1.062	11/16
6	6900-06-06-O	9/16-18	3/8-18	1.171	11/16
7	6900-06-08-O	9/16-18	1/2-14	1.234	7/8
8	6900-08-04-O	3/4-16	1/4-18	1.217	7/8
9	6900-08-06-O	3/4-16	3/8-18	1.234	7/8
10	6900-08-08-O	3/4-16	1/2-14	1.24	7/8
11	6900-08-12-O	3/4-16	3/4-14	1.406	1
12	6900-10-06-O	7/8-14	3/8-18	1.358	1
13	6900-10-08-O	7/8-14	1/2-14	1.33	1
14	6900-10-12-O	7/8-14	3/4-14	1.482	1
15	6900-12-06-O	1 1/16-12	3/8-18	1.53	1 1/4
16	6900-12-08-O	1 1/16-12	1/2-14	1.438	1 1/4
17	6900-12-12-O	1 1/16-12	3/4-14	1.578	1 1/4
18	6900-12-16-O	1 1/16-12	1-11 1/2	1.63	1 1/2
19	6900-14-12-O	1 3/16-12	3/4-14	1.683	1 3/8
20	6900-14-16-O	1 3/16-12	1-11 1/2	1.733	1 3/8
21	6900-16-08-O	1 5/16-12	1/2-14	1.61	1 1/2
22	6900-16-12-O	1 5/16-12	3/4-14	1.71	1 1/2
23	6900-16-16-O	1 5/16-12	1-11 1/2	1.71	1 1/2
24	6900-16-20-O	1 5/16-12	1 1/4-11 1/2	1.9	1 7/8
25	6900-20-16-O	1 5/8-12	1-11 1/2	1.828	1 7/8
26	6900-20-20-O	1 5/8-12	1 1/4-11 1/2	1.71	1 7/8
27	6900-24-24-O	1 7/8-12	1 1/2-11 1/2	1.953	2 1/8
28	6900-32-32-O	2 1/2-12	2-11 1/2	2.156	2 3/4

Male O-Ring x Swivel Female Pipe-90 º 6901 Series

wdt_ID	Part #	Thread B1	Thread A2	Length M	Length L	Hex C
1	6901-04-02-NWO	7/16-20	1/8-27	1.11	0.73	11/16
2	6901-04-04-NWO	7/16-20	1/4-18	1.109	0.781	11/16
3	6901-04-06-NWO	7/16-20	3/8-18	1.25	0.93	7/8
4	6901-05-04-NWO	1/2-20	1/4-18	1.13	0.79	11/16
5	6901-06-04-NWO	9/16-18	1/4-18	1.187	0.781	11/16
6	6901-06-06-NWO	9/16-18	3/8-18	1.296	0.937	7/8
7	6901-06-08-NWO	9/16-18	1/2-14	1.484	1	1
8	6901-08-04-NWO	3/4-16	1/4-18	1.486	0.919	1
9	6901-08-06-NWO	3/4-16	3/8-18	1.515	1	1
10	6901-08-08-NWO	3/4-16	1/2-14	1.515	1	1
11	6901-08-12-NWO	3/4-16	3/4-14	1.656	1.25	1 1/4
12	6901-10-06-NWO	7/8-14	3/8-18	1.64	1	1
13	6901-10-08-NWO	7/8-14	1/2-14	1.64	1	1
14	6901-10-12-NWO	7/8-14	3/4-14	1.781	1.25	1 1/4
15	6901-12-06-NWO	1 1/16-12	3/8-18	1.92	1.12	1 1/4
16	6901-12-08-NWO	1 1/16-12	1/2-14	1.921	1.125	1 1/4
17	6901-12-12-NWO	1 1/16-12	3/4-14	1.921	1.25	1 1/4
18	6901-12-16-NWO	1 1/16-12	1-11 1/2	2	1.25	1 1/2
19	6901-14-12-NWO	1 3/16-12	3/4-14	1.921	1.25	1 1/4
20	6901-14-16-NWO	1 3/16-12	1-11 1/2	2.093	1.24	1 1/2
21	6901-16-12-NWO	1 5/16-12	3/4-14	2.093	1	1 1/2
22	6901-16-16-NWO	1 5/16-12	1-11 1/2	2.093	1.39	1 1/2
23	6901-16-20-NWO	1 5/16-12	1 1/4-11 1/2	2.35	1.61	1 7/8
24	6901-20-20-NWO	1 5/8-12	1 1/4-11 1/2	2.484	1.656	1 7/8
25	6901-24-24-NWO	1 7/8-12	1 1/2-11 1/2	2.609	1.734	2 1/8
26	6901-32-32-NWO	2 1/2-12	2-11 1/2	3.25	2.312	2 5/8

Male O-Ring x Swivel Female Pipe-45 º 6902 Series

wdt_ID	Part #	Thread B1	Thread A2	Length L	Length M	Hex C
1	6902-04-04-NWO	7/16-20	1/4-18	1.062	0.656	11/16
2	6902-04-06-NWO	7/16-20	3/8-18	1.062	0.78	7/8
3	6902-06-04-NWO	9/16-18	1/4-18	1.062	0.656	7/8
4	6902-06-06-NWO	9/16-18	3/8-18	1.062	0.703	7/8
5	6902-06-08-NWO	9/16-18	1/2-14	1.062	0.812	1
6	6902-08-04-NWO	3/4-16	1/4-18	1.125	0.81	1
7	6902-08-06-NWO	3/4-16	3/8-18	1.125	0.875	1
8	6902-08-08-NWO	3/4-16	1/2-14	1.125	0.812	1
9	6902-08-12-NWO	3/4-16	3/4-14	1.22	1.08	1 1/4
10	6902-10-06-NWO	7/8-14	3/8-18	1.5	0.932	1
11	6902-10-08-NWO	7/8-14	1/2-14	1.5	0.781	1
12	6902-10-12-NWO	7/8-14	3/4-14	1.359	1.05	1 1/4
13	6902-12-06-NWO	1 1/16-12	3/8-18	1.5	1.02	1 1/4
14	6902-12-08-NWO	1 1/16-12	1/2-14	1.5	0.95	1 1/4
15	6902-12-12-NWO	1 1/16-12	3/4-14	1.5	1.046	1 1/4
16	6902-12-16-NWO	1 1/16-12	1-11 1/2	1.68	1.05	1 1/2
17	6902-16-12-NWO	1 5/16-12	3/4-14	1.625	1.05	1 1/2
18	6902-16-16-NWO	1 5/16-12	1-11 1/2	1.625	1.06	1 1/2
19	6902-20-16-NWO	1 5/8-12	1-11 1/2	1.84	1.45	1 7/8
20	6902-20-20-NWO	1 5/8-12	1 1/4-11 1/2	2.281	1.171	1 7/8
21	6902-24-24-NWO	1 7/8-12	1 1/2-11 1/2	2.609	1.343	2 1/8

Female Pipe Coupling 5000 Series

wdt_ID	Part #	Thread A1	Thread A2	Length L	Hex C
1	5000-02-02	1/8-27	1/8-27	0.75	5/8
2	5000-04-02	1/4-18	1/8-27	1.13	3/4
3	5000-04-04	1/4-18	1/4-18	1.125	3/4
4	5000-06-04	3/8-18	1/4-18	1.13	7/8
5	5000-06-06	3/8-18	3/8-18	1.125	7/8
6	5000-08-06	1/2-14	3/8-18	1.5	1 1/8
7	5000-08-08	1/2-14	1/2-14	1.5	1 1/8
8	5000-12-08	3/4-14	1/2-14	1.531	1 3/8
9	5000-12-12	3/4-14	3/4-14	1.531	1 3/8
10	5000-16-12	1-11 1/2	3/4-14	1.89	1 5/8
11	5000-16-16	1-11 1/2	1-11 1/2	1.89	1 5/8
12	5000-20-16	1 1/4-11 1/2	1-11 1/2	1.937	2
13	5000-20-20	1 1/4-11 1/2	1 1/4-11 1/2	1.937	2
14	5000-24-20	1 1/2-11 1/2	1 1/4-11 1/2	1.937	2 3/8
15	5000-24-24	1 1/4-11 1/2	1 1/4-11 1/2	1.937	2 3/8
16	5000-32-32	2-11 1/2	2-11 1/2	1.968	2 7/8

Male Pipe Hex Nipple 5404 Series

wdt_ID	Part #	Thread A1	Thread A2	Length L	Hex C
1	5404-02-02	1/8-27	1/8-27	1.062	7/16
2	5404-04-02	1/4-18	1/8-27	1.26	9/16
3	5404-04-04	1/4-18	1/4-18	1.453	5/8
4	5404-06-04	3/8-18	1/4-18	1.45	11/16
5	5404-06-06	3/8-18	3/8-18	1.453	11/16
6	5404-08-06	1/2-14	3/8-18	1.703	7/8
7	5404-08-08	1/2-14	1/2-14	1.89	7/8
8	5404-12-08	3/4-14	1/2-14	1.96	1 1/8
9	5404-12-12	3/4-14	3/4-14	1.968	1 1/8
10	5404-16-12	1-11 1/2	3/4-14	2.156	1 3/8
11	5404-16-16	1-11 1/2	1-11 1/2	2.343	1 3/8
12	5404-20-16	1 1/4-11 1/2	1-11 1/2	2.45	1 3/4
13	5404-20-20	1 1/4-11 1/2	1 1/4-11 1/2	2.484	1 3/4
14	5404-24-20	1 1/2-11 1/2	1 1/4-11 1/2	2.59	2
15	5404-24-24	1 1/4-11 1/2	1 1/4-11 1/2	2.609	2
16	5404-32-32	2-11 1/2	2-11 1/2	2.828	2 1/2

Male x Female Pipe Reducer Coupling 5405 Series

wdt_ID	Part #	Thread A1	Thread A2	Length L	Hex C
1	5405-02-04	1/8-27	1/4-18	1.21	3/4
2	5405-02-06	1/8-27	3/8-18	1.34	7/8
3	5405-04-06	1/4-18	3/8-18	1.437	7/8
4	5405-04-08	1/4-18	1/2-14	1.68	1 1/8
5	5405-04-12	1/4-18	3/4-14	1.74	1 3/8
6	5405-06-08	3/8-18	1/2-14	1.68	1 1/8
7	5405-06-12	3/8-18	3/4-14	1.74	1 3/8
8	5405-08-12	1/2-14	3/4-14	1.93	1 3/8
9	5405-08-16	1/2-14	1-11 1/2	2.18	1 5/8
10	5405-12-16	3/4-14	1-11 1/2	2.18	1 5/8
11	5405-12-20	3/4-14	1 1/4-11 1/2	2.27	2
12	5405-16-20	1-11 1/2	1 1/4-11 1/2	2.46	2
13	5405-20-24	1 1/4-11 1/2	1 1/2-11 1/2	2.5	2 3/8
14	5405-24-32	1 1/2-11 1/2	2-11 1/2	2.625	2 7/8

Male x Female Pipe Bushing 5406 Series

wdt_ID	Part #	Thread A1	Thread A2	Length L	Hex C
1	5406-04-02	1/4-18	1/8-27	0.859	5/8
2	5406-06-02	3/8-18	1/8-27	0.859	3/4
3	5406-06-04	3/8-18	1/4-18	0.859	3/4
4	5406-08-02	1/2-14	1/8-27	1.109	7/8
5	5406-08-04	1/2-14	1/4-18	1.109	7/8
6	5406-08-06	1/2-14	3/8-18	1.109	7/8
7	5406-12-04	3/4-14	1/4-18	1.171	1 1/8
8	5406-12-06	3/4-14	3/8-18	1.171	1 1/8
9	5406-12-08	3/4-14	1/2-14	1.171	1 1/8
10	5406-16-06	1-11 1/2	3/8-18	1.359	1 3/8
11	5406-16-08	1-11 1/2	1/2-14	1.359	1 3/8
12	5406-16-12	1-11 1/2	3/4-14	1.359	1 3/8
13	5406-20-12	1 1/4-11 1/2	3/4-14	1.47	1 3/4
14	5406-20-16	1 1/4-11 1/2	1-11 1/2	1.47	1 3/4
15	5406-24-16	1 1/2-11 1/2	1-11 1/2	1.57	2
16	5406-24-20	1 1/2-11 1/2	1 1/4-11 1/2	1.57	2
17	5406-32-16	2-11 1/2	1-11 1/2	1.75	2 1/2
18	5406-32-20	2-11 1/2	1 1/4-11 1/2	1.75	2 1/2
19	5406-32-24	2-11 1/2	1 1/2-11 1/2	1.75	2 1/2

Male Pipe Plug 5406-P Series

wdt_ID	Part #	Thread A1	Length L	Hex C
1	5406-02P	1/8-27	0.562	7/16
2	5406-04P	1/4-18	0.75	9/16
3	5406-06P	3/8-18	0.781	11/16
4	5406-08P	1/2-14	1.12	7/8
5	5406-12P	3/4-14	1.17	1 1/8
6	5406-16P	1-11 1/2	1.36	1 3/8
7	5406-20P	1 1/4-11 1/2	1.468	1 3/4
8	5406-24P	1 1/2-11 1/2	1.57	2
9	5406-32P	2-11 1/2	1.75	2 1/2

Note: Pipe plugs are also available with a square head (#5406-SHP) or an Allen socket (#5406-HP).

Male Pipe Elbow-90 º 5500 Series

wdt_ID	Part #	Thread A1	Thread A2	Length N	Length N1	Square Y
1	5500-02-02	1/8-27	1/8-27	0.781	0.781	1/2
2	5500-04-02	1/4-18	1/8-27	1.093	0.835	5/8
3	5500-04-04	1/4-18	1/4-18	1.093	1.093	5/8
4	5500-06-04	3/8-18	1/4-18	1.218	1.187	13/16
5	5500-06-06	3/8-18	3/8-18	1.218	1.218	13/16
6	5500-08-06	1/2-14	3/8-18	1.468	1.281	15/16
7	5500-08-08	1/2-14	1/2-14	1.468	1.468	15/16
8	5500-12-08	3/4-14	1/2-14	1.593	1.562	1 1/8
9	5500-12-12	3/4-14	3/4-14	1.593	1.593	1 1/8
10	5500-16-12	1-11 1/2	3/4-14	1.95	1.68	1 3/8
11	5500-16-16	1-11 1/2	1-11 1/2	1.968	1.968	1 3/8
12	5500-20-20	1 1/4-11 1/2	1 1/4-11 1/2	2.375	2.375	1 3/4
13	5500-24-24	1 1/2-11 1/2	1 1/2-11 1/2	2.64	2.64	2
14	5500-32-32	2-11 1/2	2-11 1/2	3	3	2 5/8

Male Pipe Elbow-45 º 5501 Series

wdt_ID	Part #	Thread A1 & A2	Length N	Length N1	Hex C
1	5501-02-02	1/8-27	0.71	0.71	5/8
2	5501-04-04	1/4-18	0.84	0.84	5/8
3	5501-06-06	3/8-18	0.96	0.96	13/16
4	5501-08-08	1/2-14	1.17	1.17	15/16
5	5501-12-12	3/4-14	1.21	1.21	1 1/8
6	5501-16-16	1-11 1/2	1.56	1.56	1 3/8
7	5501-20-20	1 1/4-11 1/2	1.62	1.62	1 3/4
8	5501-24-24	2-11 1/2	1.77	1.77	2

Male x Female Pipe Street Elbow-90 º 5502 Series

wdt_ID	Part #	Thread A1	Thread A2	Length N	Length N1	Square Y
1	5502-02-02	1/8-27	1/8-27	0.78	0.66	5/8
2	5502-02-04	1/8-27	1/4-18	0.91	0.88	3/4
3	5502-04-02	1/4-18	1/8-27	1.09	0.67	5/8
4	5502-04-04	1/4-18	1/4-18	1.09	0.88	3/4
5	5502-04-06	1/4-18	3/8-18	1.22	1.02	7/8
6	5502-06-04	3/8-18	1/4-18	1.22	0.91	13/16
7	5502-06-06	3/8-18	3/8-18	1.22	1.02	7/8
8	5502-06-08	3/8-18	1/2-14	1.38	1.23	1 1/8
9	5502-08-06	1/2-14	3/8-18	1.47	1.05	15/16
10	5502-08-08	1/2-14	1/2-14	1.47	1.23	1 1/8
11	5502-08-12	1/2-14	3/4-14	1.59	1.23	1 3/8
12	5502-12-08	3/4-14	1/2-14	1.59	1.23	1 1/8
13	5502-12-12	3/4-14	3/4-14	1.59	1.36	1 3/8
14	5502-12-16	3/4-14	1-11 1/2	1.71	1.63	1 5/8
15	5502-16-12	1-11 1/2	3/4-14	1.84	1.37	1 3/8
16	5502-16-16	1-11 1/2	1-11 1/2	1.97	1.63	1 5/8
17	5502-20-20	1 1/4-11 1/2	1 1/4-11 1/2	2.38	1.7	2
18	5502-24-24	1 1/2-11 1/2	1 1/2-11 1/2	2.64	2.08	2 3/8
19	5502-32-32	2-11 1/2	2-11 1/2	3	2.39	2 7/8

Male x Female Pipe Street Elbow-45 º 5503 Series

wdt_ID	Part #	Thread A1 & A2	Length N	Length N1	Hex C
1	5503-02-02	1/8-27	0.72	0.47	5/8
2	5503-04-04	1/4-18	1.05	0.63	3/4
3	5503-06-06	3/8-18	1.06	0.72	7/8
4	5503-08-08	1/2-14	1.34	0.91	1 1/8
5	5503-12-12	3/4-14	1.38	0.97	1 3/8
6	5503-16-16	1-11 1/2	1.72	1.13	1 5/8
7	5503-20-20	1 1/4-11 1/2	1.8	1.63	2
8	5503-24-24	1 1/2-11 1/2	2.06	1.69	2 3/8

Female Pipe Elbow-90 º 5504 Series

wdt_ID	Part #	Thread A1	Thread A2	Length N	Length N1	Square Y
1	5504-02-02	1/8-27	1/8-27	0.66	0.66	5/8
2	5504-04-02	1/4-18	1/8-27	0.88	0.72	3/4
3	5504-04-04	1/4-18	1/4-18	0.88	0.88	3/4
4	5504-06-04	3/8-18	1/4-18	1.02	0.94	7/8
5	5504-06-06	3/8-18	3/8-18	1.02	1.02	7/8
6	5504-08-04	1/2-14	1/4-18	1.23	1.07	1 1/8
7	5504-08-06	1/2-14	3/8-18	1.23	1.14	1 1/8
8	5504-08-08	1/2-14	1/2-14	1.23	1.23	1 1/8
9	5504-12-08	3/4-14	1/2-14	1.23	1.23	1 3/8
10	5504-12-12	3/4-14	3/4-14	1.36	1.36	1 3/8
11	5504-16-12	1-11 1/2	3/4-14	1.63	1.48	1 5/8
12	5504-16-16	1-11 1/2	1-11 1/2	1.63	1.63	1 5/8
13	5504-20-20	1 1/4-11 1/2	1 1/4-11 1/2	1.7	1.7	2
14	5504-24-24	1 1/2-11 1/2	1 1/2-11 1/2	2.08	2.08	2 3/8
15	5504-32-32	2-11 1/2	2-11 1/2	2.39	2.39	2 7/8

Female Pipe Elbow-45 º 5505 Series

wdt_ID	Part #	Thread A1 & A2	Length N2	Hex C
1	5505-02-02	1/8-27	0.51	5/8
2	5505-04-04	1/4-18	0.66	3/4
3	5505-06-06	3/8-18	0.81	7/8
4	5505-08-08	1/2-14	0.92	1 1/16
5	5505-12-12	3/4-14	0.92	1 3/8
6	5505-16-16	1-11 1/2	1.25	1 5/8

Male x Female Pipe Run Tee 5602 Series

wdt_ID	Part #	Thread A1, A2 & A3	Length N	Length N1	Square Y
1	5602-02-02-02	1/8-27	0.78	0.66	5/8
2	5602-04-04-04	1/4-18	1.09	0.88	3/4
3	5602-06-06-06	3/8-18	1.22	1.02	7/8
4	5602-08-08-08	1/2-14	1.47	1.23	1 1/8
5	5602-12-12-12	3/4-14	1.59	1.36	1 3/8
6	5602-16-16-16	1-11 1/2	1.97	1.63	1 5/8
7	5602-20-20-20	1 1/4-11 1/2	2.38	1.7	2
8	5602-24-24-24	1 1/2-11 1/2	2.64	2.08	2 3/8
9	5602-32-32-32	2-11 1/2	3	2.39	2 7/8

Male x Female Pipe Branch Tee 5604 Series

wdt_ID	Part #	Thread A1, A2 & A3	Length N	Length N1	Square Y
1	5604-02-02-02	1/8-27	0.78	0.66	5/8
2	5604-04-04-04	1/4-18	1.09	0.88	3/4
3	5604-06-06-06	3/8-18	1.22	1.02	7/8
4	5604-08-08-08	1/2-14	1.47	1.23	1 1/8
5	5604-12-12-12	3/4-14	1.59	1.36	1 3/8
6	5604-16-16-16	1-11 1/2	1.97	1.63	1 5/8
7	5604-20-20-20	1 1/4-11 1/2	2.38	1.7	2
8	5604-24-24-24	1 1/2-11 1/2	2.64	2.08	2 3/8

Female Pipe Tee 5605 Series

wdt_ID	Part #	Thread A1, A2 & A3	Length N	Square Y
1	5605-02-02-02	1/8-27	0.66	5/8
2	5605-04-04-04	1/4-18	0.88	3/4
3	5605-06-06-06	3/8-18	1.02	7/8
4	5605-08-08-08	1/2-14	1.23	1 1/8
5	5605-12-12-12	3/4-14	1.36	1 3/8
6	5605-16-16-16	1-11 1/2	1.63	1 5/8
7	5605-20-20-20	1 1/4-11 1/2	1.7	2
8	5605-24-24-24	1 1/2-11 1/2	2.08	2 3/8
9	5605-32-32-32	2-11 1/2	2.39	2 7/8

Female Pipe Cross 5652 Series

wdt_ID	Part #	Thread A1, A2, A3 & A4	Length N	Square Y
1	5652-02-02-02-02	1/8-27	0.66	5/8
2	5652-04-04-04-04	1/4-18	0.88	3/4
3	5652-06-06-06-06	3/8-18	1.02	7/8
4	5652-08-08-08-08	1/2-14	1.23	1 1/8
5	5652-12-12-12-12	3/4-14	1.36	1 3/8
6	5652-16-16-16-16	1-11 1/2	1.63	1 5/8
7	5652-20-20-20-20	1 1/4-11 1/2	1.7	2
8	5652-24-24-24-24	1 1/2-11 1/2	2.08	2 3/8
9	5652-32-32-32-32	2-11 1/2	2.39	2 7/8

NPTF Male x NPSM Female Union Adapter 1404 Series

wdt_ID	Part #	Thread A1	Thread A2	Length L	Hex C
1	1404-02-02	1/8-27	1/8-27	0.94	9/16
2	1404-02-04	1/8-27	1/4-18	1	11/16
3	1404-04-02	1/4-18	1/8-27	1.187	11/16
4	1404-04-04	1/4-18	1/4-18	1.25	11/16
5	1404-04-06	1/4-18	3/8-18	1.25	7/8
6	1404-06-04	3/8-18	1/4-18	1.312	7/8
7	1404-06-06	3/8-18	3/8-18	1.31	7/8
8	1404-06-08	3/8-18	1/2-14	1.31	1
9	1404-08-06	1/2-14	3/8-18	1.59	1
10	1404-08-08	1/2-14	1/2-14	1.62	1
11	1404-08-12	1/2-14	3/4-14	1.75	1 1/4
12	1404-12-08	3/4-14	1/2-14	1.65	1 1/4
13	1404-12-12	3/4-14	3/4-14	1.75	1 1/4
14	1404-12-16	3/4-14	1-11 1/2	1.812	1 1/2
15	1404-16-12	1-11 1/2	3/4-14	2.01	1 1/2
16	1404-16-16	1-11 1/2	1-11 1/2	2	1 1/2
17	1404-16-20	1-11 1/2	1 1/4-11 1/2	2.05	1 7/8
18	1404-20-20	1 1/4-11 1/2	1 1/4-11 1/2	2.06	1 7/8
19	1404-24-24	1 1/2-11 1/2	1 1/2-11 1/2	2.19	2 1/8
20	1404-32-32	2-11 1/2	2-11 1/2	2.38	2 5/8

NPTF Female x NPSM Female Union Adapter 1405 Series

wdt_ID	Part #	Thread A1	Thread A2	Length L	Hex C
1	1405-02-02	1/8-27	1/8-27	0.88	9/16
2	1405-02-04	1/8-27	1/4-18	1.26	11/16
3	1405-04-02	1/4-18	1/8-27	1.17	11/16
4	1405-04-04	1/4-18	1/4-18	1.24	11/16
5	1405-04-06	1/4-18	3/8-18	1.25	11/16
6	1405-06-04	3/8-18	1/4-18	1.312	7/8
7	1405-06-06	3/8-18	3/8-18	1.31	7/8
8	1405-06-08	3/8-18	1/2-14	1.357	1
9	1405-08-06	1/2-14	3/8-18	1.453	1
10	1405-08-08	1/2-14	1/2-14	1.5	1
11	1405-08-12	1/2-14	3/4-14	1.62	1 1/4
12	1405-12-08	3/4-14	1/2-14	1.53	1 1/4
13	1405-12-12	3/4-14	3/4-14	1.62	1 1/4
14	1405-12-16	3/4-14	1-11 1/2	1.92	1 1/2
15	1405-16-12	1-11 1/2	3/4-14	1.93	1 1/2
16	1405-16-16	1-11 1/2	1-11 1/2	2	1 1/2
17	1405-20-20	1 1/4-11 1/2	1 1/4-11 1/2	2	1 7/8
18	1405-24-24	1 1/2-11 1/2	1 1/2-11 1/2	2	2 1/8
19	1405-32-32	2-11 1/2	2-11 1/2	2.12	2 5/8

NPTF Female x NPSM Female Union Adapter 1405 Series

NPTF Male x NPSM Female 90 º Union Adapter 1501 Series

wdt_ID	Part #	Thread A1	Thread A2	Length M	Length L	Hex C
1	1501-02-02	1/8-27	1/8-27	0.69	0.94	9/16
2	1501-02-04	1/8-27	1/4-18	0.75	1.19	11/16
3	1501-04-02	1/4-18	1/8-27	0.7	1.01	11/16
4	1501-04-04	1/4-18	1/4-18	0.75	1.19	11/16
5	1501-04-06	1/4-18	3/8-18	1.5	0.937	7/8
6	1501-06-04	3/8-18	1/4-18	1.5	0.858	7/8
7	1501-06-06	3/8-18	3/8-18	0.94	1.5	7/8
8	1501-06-08	3/8-18	1/2-14	1.586	0.938	1
9	1501-08-06	1/2-14	3/8-18	1.75	1	1
10	1501-08-08	1/2-14	1/2-14	1	1.81	1
11	1501-08-12	1/2-14	3/4-14	1.19	1.25	1 1/4
12	1501-12-08	3/4-14	1/2-14	1.17	2	1 1/4
13	1501-12-12	3/4-14	3/4-14	1.19	2	1 1/4
14	1501-12-16	3/4-14	1-11 1/2	1.44	2.19	1 1/2
15	1501-16-12	1-11 1/2	3/4-14	1.39	2.38	1 1/2
16	1501-16-16	1-11 1/2	1-11 1/2	1.44	2.38	1 1/2
17	1501-16-20	1-11 1/2	1 1/4-11 1/2	1.62	2.62	1 7/8
18	1501-20-20	1 1/4-11 1/2	1 1/4-11 1/2	1.62	2.62	1 7/8
19	1501-24-24	1 1/2-11 1/2	1 1/2-11 1/2	1.75	2.81	2 1/8
20	1501-32-32	2-11 1/2	2-11 1/2	2.31	3.12	2 5/8

NPTF Female x NPSM Female 90 º Union Adapter 1502 Series

wdt_ID	Part #	Thread A1	Thread A2	Length M	Length L	Hex C
1	1502-02-02	1/8-27	1/8-27	0.687	0.656	9/16
2	1502-02-04	1/8-27	1/4-18	0.69	0.781	11/16
3	1502-04-02	1/4-18	1/8-27	0.937	0.75	11/16
4	1502-04-04	1/4-18	1/4-18	0.937	0.781	11/16
5	1502-04-06	1/4-18	3/8-18	1.062	0.937	7/8
6	1502-06-04	3/8-18	1/4-18	1.062	0.796	7/8
7	1502-06-06	3/8-18	3/8-18	1.062	0.937	7/8
8	1502-06-08	3/8-18	1/2-14	1.25	1	1
9	1502-08-06	1/2-14	3/8-18	1.25	1	1
10	1502-08-08	1/2-14	1/2-14	1.25	1	1
11	1502-08-12	1/2-14	3/4-14	1.437	1.25	1 1/4
12	1502-12-08	3/4-14	1/2-14	1.437	1.125	1 1/4
13	1502-12-12	3/4-14	3/4-14	1.437	1.25	1 1/4
14	1502-12-16	3/4-14	1-11 1/2	1.75	1.39	1 1/2
15	1502-16-12	1-11 1/2	3/4-14	1.75	1.375	1 1/2
16	1502-16-16	1-11 1/2	1-11 1/2	1.75	1.39	1 1/2
17	1502-20-16	1 1/4-11 1/2	1-11 1/2	2	1.626	1 7/8
18	1502-20-20	1 1/4-11 1/2	1 1/4-11 1/2	2	1.656	1 7/8
19	1502-24-24	1 1/2-11 1/2	1 1/2-11 1/2	2.25	1.734	2 1/8
20	1502-32-32	2-11 1/2	2-11 1/2	2.5	2.312	2 5/8

NPTF Male x NPSM Female 45 º Union Adapter 1503 Series

wdt_ID	Part #	Thread A1	Thread A2	Length M	Length L	Hex C
1	1503-02-02	1/8-27	1/8-27	0.5	0.62	9/16
2	1503-02-04	1/8-27	1/4-18	0.468	0.656	11/16
3	1503-04-02	1/4-18	1/8-27	0.51	0.91	11/16
4	1503-04-04	1/4-18	1/4-18	0.69	0.94	11/16
5	1503-04-06	1/4-18	3/8-18	1.062	0.75	7/8
6	1503-06-04	3/8-18	1/4-18	1.062	0.625	7/8
7	1503-06-06	3/8-18	3/8-18	0.75	1.06	7/8
8	1503-06-08	3/8-18	1/2-14	1.187	0.781	1
9	1503-08-YPE TH>	1/2-14	3/8-18	1.375	0.828	1
10	1503-08-08	1/2-14	1/2-14	0.88	1.31	1
11	1503-08-12	1/2-14	3/4-14	1	1.5	1 1/4
12	1503-12-08	3/4-14	1/2-14	1.15	0.875	1 1/4
13	1503-12-12	3/4-14	3/4-14	1	1.5	1 1/4
14	1503-12-16	3/4-14	1-11 1/2	1.312	1.046	1 1/2
15	1503-16-12	1-11 1/2	3/4-14	1.5	1.031	1 1/2
16	1503-16-16	1-11 1/2	1-11 1/2	1.06	1.5	1 1/2
17	1503-20-16	1 1/4-11 1/2	1-11 1/2	1.065	1.75	1 7/8
18	1503-20-20	1 1/4-11 1/2	1 1/4-11 1/2	1.25	1.75	1 7/8
19	1503-24-24	1 1/2-11 1/2	1 1/2-11 1/2	1.38	1.94	2 1/8
20	1503-32-32	2-11 1/2	2-11 1/2	1.5	2	2 5/8

NPTF Female x NPSM Female 45 º Union Adapter 1504 Series

wdt_ID	Part #	Thread A1	Thread A2	Length M	Length L	Hex C
1	1504-02-02	1/8-27	1/8-27	0.46	0.5	9/16
2	1504-02-04	1/8-27	1/4-18	0.56	0.5	1/2
3	1504-04-04	1/4-18	1/4-18	0.906	0.656	11/16
4	1504-04-06	1/4-18	3/8-18	1.004	0.734	7/8
5	1504-06-04	3/8-18	1/4-18	0.625	1.062	7/8
6	1504-06-06	3/8-18	3/8-18	1.062	0.734	7/8
7	1504-06-08	3/8-18	1/2-14	1.375	0.781	1
8	1504-08-06	1/2-14	3/8-18	0.785	1.375	1
9	1504-08-08	1/2-14	1/2-14	1.375	0.781	1
10	1504-12-12	3/4-14	3/4-14	1.25	1	1 1/4
11	1504-16-12	1-11 1/2	3/4-14	1.031	1.5	1 1/2
12	1504-16-16	1-11 1/2	1-11 1/2	1.5	1.046	1 1/2
13	1504-20-20	1 1/4-11 1/2	1 1/4-11 1/2	1.781	1.328	1 7/8
14	1504-24-24	1 1/2-11 1/2	1 1/2-11 1/2	1.968	1.25	2 1/8

NPTF Male x NPSM Female Branch Tee Adapter 1601 Series

wdt_ID	Part #	Thread A1	Thread A2 & A3	Length M	Length L	Hex C
1	1601-02-02-02	1/8-27	1/8-27	0.69	0.94	9/16
2	1601-02-04-04	1/8-27	1/4-18	0.712	1.19	11/16
3	1601-04-04-04	1/4-18	1/4-18	0.75	1.19	11/16
4	1601-04-06-06	1/4-18	3/8-18	0.822	1.5	7/8
5	1601-06-04-04	3/8-18	1/4-18	0.872	1.5	7/8
6	1601-06-06-06	3/8-18	3/8-18	0.94	1.5	7/8
7	1601-08-06-06	1/2-14	3/8-18	1	1.75	1
8	1601-08-08-08	1/2-14	1/2-14	1	1.81	1
9	1601-12-08-08	3/4-14	1/2-14	1.125	2	1 1/4
10	1601-12-12-12	3/4-14	3/4-14	1.19	2	1 1/4
11	1601-12-16-16	3/4-14	1-11 1/2	1.39	2	1 1/2
12	1601-16-12-12	1-11 1/2	3/4-14	1.338	2.375	1 1/2
13	1601-16-16-16	1-11 1/2	1-11 1/2	1.44	2.38	1 1/2
14	1601-20-20-20	1 1/4-11 1/2	1 1/4-11 1/2	1.62	2.62	1 7/8
15	1601-24-24-24	1 1/2-11 1/2	1 1/2-11 1/2	1.75	2.81	2 1/8

NPTF Female x NPSM Female Branch Tee Adapter 1602 Series

wdt_ID	Part #	Thread A1	Thread A2 & A3	Length M	Length L	Hex C
1	1602-02-02-02	1/8-27	1/8-27	0.687	0.656	1/2
2	1602-04-04-04	1/4-18	1/4-18	0.937	0.781	11/16
3	1602-06-04-04	3/8-18	1/4-18	0.872	1.062	7/8
4	1602-06-06-06	3/8-18	3/8-18	1.062	0.937	7/8
5	1602-08-06-06	1/2-14	3/8-18	1	1.25	1
6	1602-08-08-08	1/2-14	1/2-14	1.25	1	1
7	1602-08-12-12	1/2-14	3/4-14	1.437	1.25	1 1/4
8	1602-12-08-08	3/4-14	1/2-14	1.125	1.437	1 1/4
9	1602-12-12-12	3/4-14	3/4-14	1.437	1.25	1 1/4
10	1602-16-12-12	1-11 1/2	3/4-14	1.375	1.75	1 1/2
11	1602-16-16-16	1-11 1/2	1-11 1/2	1.755	1.39	1 1/2
12	1602-20-20-20	1 1/4-11 1/2	1 1/4-11 1/2	2	1.656	1 7/8

NPSM Female Tee Adapter 1603 Series

wdt_ID	Part #	Thread A1 & A2	Thread A3	Length L	Length M	Hex C
1	1603-02-02-02	1/8-27	1/8-27	1.406	0.656	1/2
2	1603-04-04-04	1/4-18	1/4-18	1.718	0.781	11/16
3	1603-04-04-06	1/4-18	3/8-18	1.718	0.878	7/8
4	1603-06-06-06	3/8-18	3/8-18	1.718	0.937	7/8
5	1603-06-06-08	3/8-18	1/2-14	2.19	0.949	1
6	1603-08-08-08	1/2-14	1/2-14	2.218	1	1
7	1603-12-12-12	3/4-14	3/4-14	2.781	1.25	1 1/4
8	1603-16-16-16	1-11 1/2	1-11 1/2	3.062	1.39	1 1/2
9	1603-20-20-20	1 1/4-11 1/2	1 1/4-11 1/2	3.312	1.656	1 7/8

How Alligator Lacing Works

Alligator lacing utilizes a design with teeth that enter parallel to the length of the belt and imbed clear through the belt carcass. The teeth are formed so that when they are driven into the belt, the vital longitudinal carcass fibers are not severed.

Additional strength is obtained due to the connecting bar and because the fastener strip is one continuous piece. This provides a strong, vise-like hold on the belt and distributes belt tension evenly across the entire belt width. The one-piece fastener strip also insures that there are no loose pieces to work themselves out of the belt and into the conveyed product. The straight splice obtained with a continuous strip of lacing also helps with hinge pin insertion.

Strength of this fastener is derived from the compression of the plates, mounted above and below the belt, with high tensile strength bolts. this “compression” distributes the splice tension across the full width of each fastener plate. The holding ability is, thereby, increased by not solely relying upon the bolts to resist pull-out.

Additional strength and resistance to pull-out is obtained from the specially formed teeth on each plate. These teeth imbed deep into the belt carcass, but without damaging the carcass fibers.

A tight butt splice is achieved through the exaggerated bolt hole spacing in the templet which forces the belt ends together. And, the Bolt Solid Plate Fasteners permit natural conformance with troughing or transition idlers.

The 140, 190 and 2 ¼ size fasteners are specifically designed for today’s thinner belting, allowing increased compression, greater reach-back and more fastener plates per belt width.

Bolt Solid Plate Fastener Selection Chart

wdt_ID	Fastener #	Belt PIW Rating (Up to)	Thickness Range	Recommended Minimum Pulley Diameter (90º Splice) Operating Tension: 75-100% of Belt Rating	Recommended Minimum Pulley Diameter (90º Splice) Operating Tension: 50-75% of Belt Rating	Recommended Minimum Pulley Diameter (90º Splice) Operating Tension: Under 50% of Belt Rating
1	1	160	3/16 to 7/16"	12"	10"	8"
2	140	225	3/16 to 7/16"	14"	12"	10"
3	190	330	5/16 to 9/16"	18"	16"	14"
4	1/1/02	300	7/16 to 11/16"	18"	16"	14"
5	2	440	9/16 to 13/16"	30"	28"	24"
6	2/1/04	620	9/16 to 1-3/16"	36"	34"	34"
7	2/1/02	450	3/4 to 1"	42"	42"	42"
8	3	560	15/16" & Over	48"	48"	48"
9	SP6	150	1/4 to 1/2"	14"	12"	10"

Fastener Metals

Bolt Solid Plate fasteners come in a variety of metals for many applications.

Technical excellence and over 85 years of experience have resulted in the broadest range of standard hooks in the industry – over 800 sizes and configurations in 12 different metals. Our ability to provide customized leg lengths, point lengths and special materials, with almost unlimited variations in hook spacing, and custom carded and Unibar lengths; supports our statement “If it’s a belt, Clipper has a hook to fasten it.”

Round Series# 25

wdt_ID	Part #	Belt Thickness	Min. Pulley Dia.	Wire Dia.	Connecting Pin	Metals
1	25SP	Up to 3/64"	15/16"	.025"	25	316L, G
2	25LL SP	Up to 3/64"	2"	.025"	25	316L, G
3	25	3/64 - 1/16"	15/16"	.025"	25	316L, G
4	25 LL	3/64 - 1/16"	2"	.025"	25	316L, G
5	25 LP	1/16 - 1/8"	15/16"	.025"	25	316L, G
6	25 LL LP	1/16 - 1/8"	2"	.025"	25	316L, G

ClipMark Series #36

wdt_ID	Part #	Belt Thickness	Min. Pulley Dia.	Wire Dia.	Connecting Pin	Metals
1	UCM 36 SL XSP	Up to 1/16"	15/16"	.036" Oval	25	316L
2	UCM 36 XSP	Up to 1/16"	2"	.036" Oval	25	316L
3	UCM 36 SL SP	1/16 - 3/32"	15/16"	.036" Oval	25	316L
4	UCM 36 SP	1/16 - 3/32"	2"	.036" Oval	25	316L
5	36 SP	1/16 - 3/32"	2"	.036" Oval	25	316L
6	UCM 36 LL SP	1/16 - 3/32"	3"	.036" Oval	25	316L
7	36 LL SP	1/16 - 3/32"	3"	.036" Oval	25	316L
8	UCM 36	3/32 - 1/8"	2"	.036" Oval	25	316L
9	36	3/32 - 1/8"	2"	.036" Oval	25	316L
10	UCM 36 LL	3/32 - 1/8"	3"	.036" Oval	25	316L
11	36 LL	3/32 - 1/8"	3"	.036" Oval	25	316L
12	UCM 36 LP	1/8 - 5/32"	2"	.036" Oval	25	316L

Round Series# 40 (old #1)

wdt_ID	Part #	Belt Thickness	Min. Pulley Dia.	Wire Dia.	Connecting Pin	Metals
1	1-D	1/16 - 3/32"	2"	.040"	25	430, 316L, HT, G
2	1-D LL	1/16 - 3/32"	3"	.040"	25	430, 316L, HT, G
3	UX-1 SP	1/16 - 1/8"	2"	.040"	25	430, 316L
4	UX-1LL SP	1/16 - 1/8"	3"	.040"	25	430, 316L
5	1-A	3/32 - 1/8"	2"	.040"	25	430, 316L, HT, G
6	1-A LL	3/32 - 1/8"	3"	.040"	25	430, 316L, HT, G
7	1	1/8 - 5/32"	2"	.040"	25	430, 316L, HT, G
8	1 LL	1/8 - 5/32"	3"	.040"	25	430, 316L, HT, G
9	UX-1	1/8 - 5/32"	2"	.040"	25	430, 316L
10	UX-1 LL	1/8 - 5/32"	3"	.040"	25	430, 316L

Round Series #54 (old Regular)

wdt_ID	Part #	Belt Thickness	Min. Pulley Dia.	Wire Dia.	Connecting Pin	Metals
1	2 SP	1/8 - 5/32"	3"	.054"	13	430, 316L, HT, G
2	U1	1/8 - 5/32"	3-1/2"	.054"	13	430, CS
3	3-1	1/8 - 5/32"	3-1/2"	.054"	13	430, 316L, HT, G
4	2	5/32 - 3/16"	3"	.054"	13	430, 316L, HT, G
5	U2	5/32 - 3/16"	3-1/2"	.054"	13	430, CS
6	4-2	5/32 - 3/16"	4"	.054"	13	430, 316L, HT, G
7	3	3/16 - 7/32"	3-1/2"	.054"	13	430, 316L, HT, G
8	U3	3/16 - 7/32"	3-1/2"	.054"	13	430, CS
9	3-4-1/2	7/32 - 1/4"	4"	.054"	13	430, 316L, HT, G
10	4	7/32 - 1/4"	4"	.054"	12	430, 316L, HT, G
11	U4	7/32 - 1/4"	5"	.054"	12	430, CS
12	4-1/2	1/4 - 9/32"	4"	.054"	11	430, 316L, HT, G
13	5	9/32 - 5/16"	5"	.054"	11	430, 316L, HT, G
14	U5	9/32 - 5/16"	5"	.054"	11	430, CS
15	6	5/16 - 3/8"	6"	.054"	9	430, 316L, HT, G
16	7	3/8 - 13/32"	6"	.054"	9	430, 316L, HT, G

Rectangular Series #54

wdt_ID	Part #	Belt Thickness	Min. Pulley Dia.	Wire Dia.	Connecting Pin	Metals
1	3 Rect	3/16 - 7/32"	3-1/2"	.052 x .057"	13	Rect HT
2	4-1/2 3 Rect	3/16 - 7/32"	4"	.052 x .057"	12	Rect HT
3	4-1/2 Rect	1/4 - 9/32"	4"	.052 x .057"	12	Rect HT

Metals Key

G – Galvanized Steel
HT – High Tensile Steel
430 – 430 Stainless Steel
CS – Coated Steel
316L – Low-carbon 316 Stainless Steel

Other Metals Available

Monel 400
Inconel 600
Phosphor Bronze
Hastelloy C276
Carpenter 20CB3
Black Oxide

Notes

Hook Series groupings are determined by wire diameter and/or cross section. The ClipMark Series has a flattened oval design to achieve a low profile without sacrificing strength. The Rectangular Series has a rectangular cross section and additional strength for abusive or abrasive applications. All others are round wire.
Hook Size/Style – The various size hooks have the appropriate loop, leg length and point lengths to accommodate belt thickness ranges indicated. Sizes designated with “U” are Unibar Style.

Connecting Pins

Connecting pins are the vital link that combined with properly selected and laced hooks, complete a perfect splice. Manufactured to Clipper’s high quality standards, we have 14 different styles and materials to choose from, to fit every hook and every possible application; in 100′ Pin Paks or coils.

Pins

wdt_ID	Pin Type	Avail. Sizes	Wear Factor	Rigidity	Magnetic	Flexibility	Composition
1	Nylo-Steel	25, 13, 12, 11, 9	Good	Good	Yes	Good	Nylon & Music Wire
2	Nylo-SS	25, 13, 12, 11, 9	Good	Good	Slightly	Good	Nylon & 316SS Spring Wire
3	Lube Pins	25, 13, 12, 11, 9	Excellent	Excellent	No	Excellent	UHMW Polyethylene
4	Nylon Covered Cable	25, 13, 11, 9	Good	Average	Slightly	Good	Nylon & 316SS Cable
5	Dacron Covered Cable	13	Excellent	Average	Slightly	Good	Dacron Urethane & 316SS Cable
6	Solid Nylon	25, 13	Good	Fair	No	Excellent	Nylon
7	Music Wire	.043, .054, .072, .092"	Good	Excellent	Yes	Good	High-Carbon Spring Tempered Steel
8	Cold Rolled Steel	25, 13	Average	Excellent	Yes	Fair to Poor	Mild Steel
9	Stainless Steel	25, 13	Average	Excellent	Slightly	Fair to Poor	302 or 316 Stainless Steel
10	Duralink	25, 13, 12, 11	Excellent	Average	Slightly	Good	Wear Resistant Nylon & 316SS Cable
11	Dura Stainless	25, 13, 12	Excellent	Average	Slightly	Excellent	Wear Resistant Nylon & 316SS Spring Wire
12	Bamboo	25, 13	Good	Good	No	Poor	Bamboo
13	Bare Stainless Cable	25, 13	Average	Fair	Slightly	Good	316SS Cable

The Roller Lacer

In 1982, Clipper Belt Lacer Company introduced a product that revolutionized conveyor belt lacing. the Roller Lacer combined common sense and convenience in a lightweight machine that allowed a single operator to consistently install quality, long-lasting splices in wide belts. Hooks go into the belt quickly, yet evenly.

The Roller Lacer comes in four widths: 24″, 36″, 48″ and 60″. These lacers are custom designed to work with a wide range of Clipper fasteners.

Hinged bolt fasteners provide a flexible joint for belts operating over small pulleys. Because the joint is easily separated by simply removing the hinge pin, entire belt sections may be added or eliminated.

Designed as a compression fastener,the bolt hinged model is fastened to the belt ends with high strength bolts. These compress the plates into the belt cover. Additional holding capabilities is provided by the fastener teeth that imbed in the belt without damage to the belt carcass.

This combination distributes the splice tension across the entire plate width, while the teeth secure the fastener into the belt carcass to resist pull-out.

375X

Designed for belt conveyors with center distances less than 1000 feet.

For belts 1/4″ to 13/32″ thick.

Use on belts with mechanical fastener ratings up to 190 PIW.

Operates over 6″ minimum pulley diameter.

Fastener strips ensure a straight splice and faster installation.

Available in complete joints for various belt widths or in bulk fasteners without hinge pins.

550

For belts 1/4″ to 5/8″ thick.

Use on belts with mechanical fastener ratings up to 300 PIW.

Operates over 9″ minimum pulley diameters.

Available in complete joints for various belt widths or in bulk fasteners without hinge pins.

Most 550 steel joints are furnished with continuous, single-piece fastener strips (belt widths 24″, 30″, 36″, 42″ and 48″). These strips reduce installation time and insure a straight splice. These and other width joints are available, made up with individual fastener plates, for increased joint flexibility on deep-troughing idlers or where poor belt alignment is a problem.

750

For belts 9/16″ to 7/8″ thick.

Use on belts with mechanical ratings up to 400 PIW.

Operates over 20″ minimum pulley diameters.

Available in complete joints for various belt widths or in bulk fasteners without hinge pins. Individual steel plates are standard.

Fastener Selection Chart

wdt_ID	Fastener Size	PIW Mech. Fast. Rat. to:	Belt Thick. Range	Rec. Min. Pulley Dia. Oper. Tens.: 100% of Belt Rat.	Rec. Min. Pulley Dia. Oper. Tens. Under 75% of Belt Rat.
1	375X	190	1/4" - 13/32"	6"	4"
2	550	300	1/4" - 5/8"	9"	7"
3	750	400	9/16" - 7/8"	20"	18"

Ordering Numbers

Each “J” carton contains one complete belt joint. This includes: fasteners, hinge pin, filler tubing, bolts and nuts; assembly clips and a gauge rod for easy installation. (The connected fastener strips, 375X and certain widths of 550 strip, do not require clips, so none are included.)

Ordering Numbers for Steel Fasteners

wdt_ID	Belt Width	375X with Nylon Covered Steel Cable Part #	550 with Nylon Covered Steel Cable Part #	750 with Nylon Covered Steel Cable Part #
1	12"	375XJ12NC	-	-
2	14"	375XJ14NC	-	-
3	16"	375XJ16NC	-	-
4	18"	375XJ18NC	550J18NC	-
5	20"	375XJ20NC	550J20NC	-
6	24"	375XJ24NC	550J24NC	-
7	30"	375XJ30NC	550J30NC	-
8	36"	375XJ36NC	550J36NC	750J36NC
9	42"	375XJ42NC	550J42NC	750J42NC
10	48"	375XJ48NC	550J48NC	750J48NC
11	60"	-	550J60NC	-

Ordering Numbers for Stainless Steel Fasteners with Nylon Covered Stainless Cable

wdt_ID	Belt Width	375X with Nylon Covered Steel Cable Part #	550 with Nylon Covered Steel Cable Part #	750 with Nylon Covered Steel Cable Part #
1	18"	375XSJ18NCS	550SJ18NCS	-
2	24"	375XSJ24NCS	550SJ24NCS	-
3	30"	375XSJ30NCS	550SJ30NCS	-
4	36"	375XSJ36NCS	550SJ36NCS	-
5	42"	-	550SJ42NCS	-
6	48"	-	550SJ48NCS	-

Note: Part numbers above include a Nylon Covered Steel Cable for steel fasteners and a Nylon Covered Stainless Steel Cable for stainless steel fasteners. For other cables, replace the “NC” or “NCS” in the above part numbers with the Hinge Pin suffix letters given below.

Hinge Pins for Bolt Hinged Lacing

SC - Bare Steel Cable

For conveying gritty or highly abrasive material, Bare Steel Cable (SC) is recommended. Offered for numbers 375X and 550 fasteners only.

NCS - Nylon Covered Stainless Steel Cable

For greater corrosion resistance, the Nylon Covered Stainless Steel Cable (NCS) is furnished standard with Stainless joints. In is notrecommended for use with deep troughing idlers over 35 º.

NC - Nylon Covered Steel Cable

The nylon coating reduces corrosion and makes pin insertion easier.

NB - Nylon Covered Bronze Cable

For a non-magnetic joint, use fully non-magnetic Nylon Covered Bronze Cable (NB) with Everdur fasteners.

SSC - Bare Stainless Steel Cable

Where corrosion attacks steel cable hinge pins, Bare Stainless Steel Cable (SSC) does the job. Not recommended for use with deep troughing idlers over 35 º.

NAC - Nylon Covered Armored Cable

The right hinge pin for many mining conditions is the Nylon Covereed Armored Cable (NAC). Long service life is due to the patented hinge pin design. It combines a durable, flat wire wrap around the cable which is covered by nylon for smooth operation.

Note: Bulk fastener sets, replacement bolts and nuts and extra hinge pins are available. Please call our TFE Customer Service Department for availability.

Bolt Hinged Installation Tools and Supplies

Curved Templates

Used in conjunction with the “clip and gauge rod” method to install complete joints, the templet acts as a guide to accurately punch or drill holes into the belt ends. This insures proper fastener alignment.

Templets are available for all sizes of Bolt Hinged fasteners. They come in lengths for standard belt widths. See table below for ordering information.

Curved Templets for Bolt Hinged Fasteners

wdt_ID	Belt Width	375X Part #	550 Part #	750 Part #
1	18"	375X-18	518	-
2	20"	375X-20	500	-
3	24"	375X-24	524	-
4	30"	375X-30	530	-
5	36"	375X-36	536	-
6	42"	375X-42	542	-
7	48"	375X-48	548	748
8	60"	375X-60	560	-

Hand or Power Tools for Bolt Hinged Fasteners

In addition to a templet or aligning holder, the following hand or power tools are required for installation: a punch or a boring bit (the punch is preferred for general use and where the belt cover is over 3/16″ thick); a wrench (a different wrench is required for stainless fasteners, which are furnished with slotted nuts); and a bolt breaker.

A power impact wrench cuts application time to approximately 50%. It should be used with a “quick change chuck” which adapts the tools to the square drive stud on an air or electric impact wrench.

Hand Tool Ordering Numbers

wdt_ID	Fastner Number	Bolt Hole Diameter	Punch Part #	Boring Bit Part #	Wrench Part #	Bolt Breaker Part #
1	375X & 550	1/4"	P1P	B1B	100 (S1S*)	110
2	750	3/8"	P3P	B3B	S3S	113

*Note: S1S and HW1 are for use with Stainless Steel Nuts

Quick Change Chuck

To use power tools, a Quick Change Chuck is required. This adapts tools to the square drive stud on air or electric impact wrenches.

Quick Change Chuck for Bolt Hinged Fasteners

wdt_ID	Fastener Size	Drive Size	Part #
1	375X & 550	1/2"	5552

The Ready Set Staple System

With the Ready Set Staple fastener system, an extended plate design separates the point of staple penetration from the line of belt flexing, thus eliminating splice fatiguing that results from sawing action at the point of attachment.

High tensile, stainless steel staple fasteners are furnished in strips with a bridge between each fastener plate. This strip design prevents individual parts from getting into the product being conveyed – eliminating a problem that may occur with some hook or teeth types of fasteners. The Ready Set Staples provide a strong splice, resistance to impact damage, and a smooth, unrippled joint that makes hinge pin insertion easier.

Ready Set Staples work between carcass fibers without severing them. Staples are hammer-driven through the belt, then clinched cross-wise to the belt, so that belt tension does not pull against the staples to unclinch them.